Jump to content

Recommended Posts

I am using ip network camera with NVR

 

Camera A is remote channel 1 and assigned to viewing on NVR channel 1

Camera B is remote channel 1 and is assigned to viewing on NVR channel 3

Viewing works fine because A is on channel 1 and B is on channel 3

 

When A and B were installed from different manufacturers, they are both assigned number 1 for each manufacturer automatically.

 

Problem is that the NVR cannot control 2 cameras on the same physical remote channel number 1 (but no problem with viewing because the viewing is reassigned)

 

I need help with changing one of the remote physical channel

 

Looks like it has to be done on the actual camera but I have no idea or software how to change it

Share this post


Link to post
Share on other sites

I am using ip network camera with NVR

 

Camera A is remote channel 1 and assigned to viewing on NVR channel 1

Camera B is remote channel 1 and is assigned to viewing on NVR channel 3

Viewing works fine because A is on channel 1 and B is on channel 3

 

When A and B were installed from different manufacturers, they are both assigned number 1 for each manufacturer automatically.

 

Problem is that the NVR cannot control 2 cameras on the same physical remote channel number 1 (but no problem with viewing because the viewing is reassigned)

 

I need help with changing one of the remote physical channel

 

Looks like it has to be done on the actual camera but I have no idea or software how to change it

 

Hi

 

You can try and log into the camera using the ip address of the camera via a browser and check the settings there,

 

Regards

Share this post


Link to post
Share on other sites

I tried everything I can think of because posting.

Could not find any option via the web browser

I have even contacted Dahua for the NVR but as you know, Dahua does not provide technical

Share this post


Link to post
Share on other sites
I tried everything I can think of because posting.

Could not find any option via the web browser

I have even contacted Dahua for the NVR but as you know, Dahua does not provide technical

 

HI

 

Is it a Dahua IP PTZ camera, if so you can change the camera number with the dip switches send me the model number then can get you the dip switch settings

Share this post


Link to post
Share on other sites

All equipment are digital network - not analog

 

Everything has two cords each - 1. power, 2. cat5 - no other cables.

 

Everything is connected only to the network. No camera is connected to the NVR.

Digital IP network camera does not have any dip switch to set or manage -everything is done via software on the network

The Dahua camera is SD65230HNI

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×