Jump to content
vipercstech

Dahua IPC-HDB3200CN on Hikvision DS-7716NI-SP

Recommended Posts

I am trying to add a Dahua IPC-HDB3200CN camera to my Hikvision DS-7716NI-SP NVR. I have tried all the options I can think of to get this thing working. All the Hikvision cameras are plug-and-play with ip address of 192.168.254.X. Right now I have the IP address for the Dahua camera set to 192.168.254.4. Can anyone help me get this going?

 

Settings I have tried:

 

Management Port: 80

Protocol: ONVIF

 

Management Port: 9988

Protocol: ONVIF

 

Management Port: 80

Protocol: RTSP

Port: 554

Stream Path: //cam/realmonitor

 

Management Port: 9988

Protocol: RTSP

Port: 554

Stream Path: //cam/realmonitor

 

Management Port: 80

Protocol: RTSP

Port: 554

Stream Path: /realmonitor

 

Management Port: 9988

Protocol: RTSP

Port: 554

Stream Path: /realmonitor

Share this post


Link to post
Share on other sites

If you are trying to plug the dahua camera directly into the back of the NVR, it will not work, because Hikvision uses a non compliant version of direct plug and play with dahua. So basically Hikvision just want their cameras to be able to plug in the back of their NVRs, it's all business. To get it to work, you will need to have a separate switch that the NVR plugs to and the dahua camera plugs to. Had the same issue a couple weeks ago.

 

Oh and make sure the switch you get is POE.

Share this post


Link to post
Share on other sites

I have the same model NVR and run some DAHUA cameras:

 

You do need to assign a static IP to the camera, after that plug it back into the NVR and add the IP manually to the NVR.

 

Steps:

1. Plug the camera to you router/switch (not into the back of the NVR).

Also you need to power the camera. (if it is not a poe switch)

2. Run a computer/laptop on the same network.

3. Download this configuration tool and run it. You'll see the camera's IP showing up there.

4. Double click the IP and modify it to: 192.168.254.100, default

gateway: 192.168.254.1

5. Plug the camera to the NVR.

6. Add the camera's IP manually with these settings:

Protocol: ONVIF

Address: 192.168.254.100

Username: admin

Password: admin

 

You need to do this for all the cameras that are a different brand from the NVR (Hikvision).

Share this post


Link to post
Share on other sites

btw.. I would make sure you don't have too old of firmware for the HDB3200 camera. Mine are US models, and are using this firmware:

 

General_IPC-HX3(2)XXX_Eng_N_V2.420.0000.0.R.20140414.bin

 

 

Software Version2.420.0000.0.R, build : 2014-04-14

 

WEB Version3.2.1.183358

 

ONVIF Version2.4.1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×