logicrussh 0 Posted May 4, 2016 One of the cameras has this blue image. until i turn off the power supply and turn it back on, but, few hours later it comes back to blue. Any ideas on whats wrong whit it? Share this post Link to post Share on other sites
tomcctv 187 Posted May 4, 2016 Hi. Which system do you have ? Share this post Link to post Share on other sites
logicrussh 0 Posted May 4, 2016 Hi. Which system do you have ? DVR Brand: DAHUA Specs: 16 Channels HDCVI 720P / 1080P / ANALOGIC / 2 IP / 4 AUDIO / HDMI / VGA / P2P / 2 INTER CAMERA Brand: DAHUA Model: HFAW2200B36 Specs: HD HDCVI - 1080P / 2 MP / 3.6 MM Lens / SMART IR 98 ft / IP66 / 12VCD Share this post Link to post Share on other sites
tomcctv 187 Posted May 4, 2016 Hi. Depending on which firmware you have ..... On your screen when all cameras are up .. If you click on a little blue icon In the window of the camera with the problem it will give you options for that camera. Un tick auto brightness and at the bottom of that window click auto Share this post Link to post Share on other sites
logicrussh 0 Posted May 4, 2016 Hi. Depending on which firmware you have ..... On your screen when all cameras are up .. If you click on a little blue icon In the window of the camera with the problem it will give you options for that camera. Un tick auto brightness and at the bottom of that window click auto There's no such option on the DVR... All i saw was color adjustments bright, gamma, sharpness, etc.. Share this post Link to post Share on other sites
