Juisseli 0 Posted June 7, 2016 Odd problem, as seen on picture attached, all 4 cameras (NVR4108-P + HDBW4200E) are connected to nvr's own PoE and all of them are duplicated, as first aid, i have changed the remote channel to 11 to confuse the nvr.. has anyone else had this kind of a problem? Share this post Link to post Share on other sites
dexterash 0 Posted June 9, 2016 Did you try to discover/add them manually? Just reset the NVR and plug the cameras. No other config should be needed. Share this post Link to post Share on other sites
Juisseli 0 Posted June 10, 2016 Did you try to discover/add them manually? Just reset the NVR and plug the cameras. No other config should be needed. No i didn't, just plugged in and they pop twice on the channel list. And if i press the x, it doesn't help. NVR keeps adding them on the list. Share this post Link to post Share on other sites
dexterash 0 Posted June 10, 2016 The NVR auto-adds any device plugged into PoE ports. Reset the NVR & just plug them, without any other config. Share this post Link to post Share on other sites
