help with ptz

[ant200 0]

hi all i have a panasonic wv-cs580g cani use my  iapollo hdrt lite dvr to control it thanks

[tomcctv 187]

Hi. How do you have it connected to your dvr .  ......

that unit has rs485 plus terminals A &B 

 

it it is A &. b you need to control 

[ant200 0]

hi bud it has rs 485 on cam and ab on dvr 

[tomcctv 187]

Ok. So what are the protocols on the camera and the dvr 

you should see PTZ on your monitor when you power down then back on

[ant200 0]

hi no just dont do nothing picture but no movment

set dvr as pelco d and dip switches set as same as  book says pelco d and yes still nothing 

[ant200 0]

would i need a joystick control aswell thanks

 

[tomcctv 187]

4 minutes ago, ant200 said:

would i need a joystick control aswell thanks

 

No joystick needed with building rs485 

address .......01 

protocol ......Pelco d 

baud rate ........2400

 

set on both your camer and dvr

 

on your dvr .... Hit menu at bottom and I think PTZ settings are second down on left of window

 

 

 

 

[ant200 0]

Hi Tom the 485 plug has 4 wires in 2 tx 2 rx cut plug off as only use the two  that goes two   A B

address 1

protocol pelco d

baudrate  9600

Data bits 8

Stop bits 1

Parity none

set both cam and dvr 

To this and got nothing

     Thaks