Jump to content
kxn25

Sance DVR System

Recommended Posts

Hello,

i have a Sance DVR System with 4 IPC ´s 

I do need help in chanching the Programm parameters, mostly i want to change the General IP Address of the System which ist 172.20.14.1.

Also i would like to expand the system to more than 4 cams! Is that possible? Shurly its just a Software issue...

 

If anyone can help me i would explain it more deeply...

 

Regards KXN

Share this post


Link to post
Share on other sites

Hi. Why do you want to change your IP address.......it's not a good idea to post your existing IP address .......you need to edit your post 

I can also see your using ports 34567.

 

1 hour ago, kxn25 said:

Also i would like to expand the system to more than 4 cams! Is that possible? Shurly its just a Software issue...

 

If you have a 4cam system then you can't expand ......... Otherwise no point in selling 4-8-16 way systems

Share this post


Link to post
Share on other sites
On 2/8/2019 at 5:45 PM, tomcctv said:

Otherwise no point in selling 4-8-16 way systems

Sure but is this a Sales Forum? 

Iam all about tinkering things, so i was curios if that is possible.

And i want the IP in my Range so i can include pictures of a cam in my Homesystem.

Why is showing my IP in the Forum a Problem? What can you do with that IP address?

Share this post


Link to post
Share on other sites
On 2/8/2019 at 4:45 PM, tomcctv said:

Hi. Why do you want to change your IP address.......it's not a good idea to post your existing IP address .......you need to edit your post 

I can also see your using ports 34567.

 

If you have a 4cam system then you can't expand ......... Otherwise no point in selling 4-8-16 way systems

 

1 hour ago, kxn25 said:

Sure but is this a Sales Forum? 

 Iam all about tinkering things, so i was curios if that is possible.

Why would it be a sales forum ?

you can tinker with as much software as you like 

It’s not just a matter of software ..... software can’t add hardware. So if you buy a 4 channel that’s all you have because that’s hardware for 4 

Share this post


Link to post
Share on other sites
On 4/20/2019 at 9:03 AM, tomcctv said:

So if you buy a 4 channel that’s all you have because that’s hardware for 4 

i have a 4 Channel WIFI System but iam feeding my Cameras hard wired in the System Trouch the Lan Port. 

So and there its a matter of Software that does ot alow to add more than 4 Cameras.

Is ther a Software i could flash on to the System that you can Recommand?

 

Share this post


Link to post
Share on other sites
1 hour ago, kxn25 said:

i have a 4 Channel WIFI System but iam feeding my Cameras hard wired in the System Trouch the Lan Port. 

So and there its a matter of Software that does ot alow to add more than 4 Cameras.

Is ther a Software i could flash on to the System that you can Recommand?

 

Ok ..... then let’s test your reason. ......

keep your 4 cameras wired and add another via the wireless......... see if it gives you 5

 

4 channel has graphics for 4

8 channel has graphics for 8

graphics is via hardware as card or chip

 

it would be easy for everyone to upgrade from 4  to 8 to 16. With your way of thinking

Share this post


Link to post
Share on other sites

If i want to add it says no channels free.

7 hours ago, tomcctv said:

With your way of thinking

I have wired my Cameras like that trough the LAN port. 

And the Camera´s IP is the one fitting the system 172.20.14.1(Gateway) 

For the Webview acsess iam useing my home IP Range 169.69.... and so on

but phiscly is only 1 Networkcable on the System connected. And on some of the Camere´s i have disconnected the Wifi card.

So it´s a matter of is the Chip realy to small for more than 4 Camera´s or is it just the Software not alowing more than 4 Camera´s!

Share this post


Link to post
Share on other sites
1 hour ago, kxn25 said:

So it´s a matter of is the Chip realy to small for more than 4 Camera´s or is it just the Software not alowing more than 4 Camera´s!

It means you ONLY have a 4 channel unit 

SOFTWARE WILL NOT allow you to expand your system it does not have the hardware 

1 hour ago, kxn25 said:

If i want to add it says no channels free.

I wonder why your unit says that .......... It could be its only a 4 channel unit

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×