Kalip 0 Posted February 8, 2019 I am thinking of adding a camera to my CCTV system. (I know that there are standards or codes in electrical wiring) Are there any colour codes for Video Balun Transceiver and Power Supply wires when using CAT5 OR CAT6 cable to install CCTV HD Analog Cameras? Share this post Link to post Share on other sites
tomcctv 187 Posted February 8, 2019 Hi. Good idea to use video .......blue + and blue/white - power ......all solid colours + stripe - Share this post Link to post Share on other sites
Kalip 0 Posted February 9, 2019 Thank you for your advice. Share this post Link to post Share on other sites
cctvman1379 2 Posted February 13, 2019 Brown pair pos\+ Blue pair neg - Green pair video solid + stripe - Orange pair video solid + stripe - Share this post Link to post Share on other sites
tomcctv 187 Posted February 13, 2019 11 minutes ago, cctvman1379 said: Brown pair pos\+ Blue pair neg - Green pair video solid + stripe - Orange pair video solid + stripe - Hi using pair on both + and - video is the bad way to use baluns and never recommend 1 pair only for video Share this post Link to post Share on other sites
cctvman1379 2 Posted February 13, 2019 I meant green pair for one camera and orange for another may not have been clear Share this post Link to post Share on other sites
Opeth 3 Posted June 14, 2020 Using ferrules at the end for the passive balun so the wire don't gettin lose or cut is a good idea? Share this post Link to post Share on other sites
Opeth 3 Posted June 15, 2020 On 2/9/2019 at 1:24 AM, tomcctv said: Hi. Good idea to use video .......blue + and blue/white - power ......all solid colours + stripe - What is your suggestion... Using video power balun with rj45 or using passive balun with power connector? Share this post Link to post Share on other sites
