Jump to content
Sign in to follow this  

help for update

Recommended Posts

hi all the forum.... i have a dvr with xmeye software and i would like update. the model is ahb 7004T lm v3 with chip hi3520, and software now installed V4.02.R11.52431191.10001.231900.00000
it's possible help me for try or if you have a update of my dvr?

i great and best regards. thanks advance



Share this post

Link to post
Share on other sites

hi.... because not read only hard disk western digital, but if i install hard disk on another dvr 7008 or 7016 or on pc the hard disk work normally. if i install on the 7004t another hard disk seagate, toshiba.....work normally also the 7004t... i think that upgrade resolve my problem....i hope....


you can help me?

Share this post

Link to post
Share on other sites

I went to look at a HIKVision for a friend last week where the HDD would just drop out for no reason.

The DVR would record for 3 or 4 hours, then the HDD just dissapears.

Reboot the DVR and it would come back for a few hours more.

I tried 3 other HDD's in the DVR, and when none of them were recognised at all, i knew there was something else going on.


It turned out, that whoever installed the system, had fitted a splitter cable on the DVR PSU to power an IP camera.

Once I removed the splitter and had the power supply feed only the DVR, it's been fine since.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this