Jump to content
Sign in to follow this  
keat63

GoVision GV3008H - no pre-record.

Recommended Posts

Chaps.

 

I replaced my ageing AVtech dvr last weekend for a more up to date system, with higher res camears etc.

An ebay special 'GoVision GV3008H', i'm guessing it's a chinese clone of something else.

I'm having problems getting pre record on motion detect to work.

 

With a 20 second pre-record configured, if I create a masked area, and step inside the mask, then motion detect is triggered, and recording starts, but it only starts from the point at which is was triggered.

In effect, when played back, I appear from nowhere.

 

If I'm outside the mask, I can hang about there all day long, and nothing is recorded, step over the line, recording starts.

So I know that the mask is working is intended.

So either the DVR is not pre-recording, or if it is, then it doesn't play this portion back.

 

Does anyone have any experience with this system or can offer any advice.

Share this post


Link to post
Share on other sites

if it is a fake you probably are stuck with the problem.  I have used real Geo for years and have not encountered this particular problem but I never had any need to set pre record to more than a couple of seconds

  • Thanks 1

Share this post


Link to post
Share on other sites
On 1 March 2019 at 8:53 AM, keat63 said:

GoVision GV3008H', i'm guessing it's a chinese clone of something else.

Hi no not a clone ...... Just a China company making themselves look like Taiwan based geovision don't get them mixed up 

 

govision is a low budget unit with a lot of misleading specs ...... 5mp sold as 4K 

prices start at $55 ........ Is enough to know it's cheap junk 

Share this post


Link to post
Share on other sites

It didn't take me long to figure that it was a play on something else.

Funny how GeoVision manufacture a GV3008.

I think I've identified it to: http://www.xiongmaitech.com/en/

 

I know it's cheap, this is why I bought it, but then so was my old AVTech which has served me well for going on 10 years.

It does everything I need it to do, other than the pre-record issue.

Maybe I'll try reducing the threshold instead of keep increasing it.

 

Share this post


Link to post
Share on other sites
17 hours ago, jeromephone said:

I guess it would help if I read the post a little better govision vs Geovision!

You were right to think it’s geo that’s there point on using geo part numbers 

Share this post


Link to post
Share on other sites
8 minutes ago, keat63 said:

think I've identified it to:

Govision is a company 

 

have you set recorder to motion or 24hr record. And you don’t need to mask off in motion alerts that is something different.... that’s motion alarm 

Share this post


Link to post
Share on other sites

I have record set to motion, and I have to utilse motion alarm otherwise, i've nothing to search against.

 

Playback search options are .

i/o input

alarm input

regular

manual

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×