Jump to content
Sign in to follow this  
MJY

Add POE camera to wireless system?

Recommended Posts

Hi guys, I have a 8 channel NVR system with 4 cameras (model TC-734NVR To be exact. One of the many, but they are all the same on the inside). All the existing cameras are connected dirrectly to the NVR wirelessly. The NVR is all wireless and does not have and camera ethernet ports. I'm wondering, if it's possible to hook up a RLC-410 5MP poe camera to it by connecting it to the same network as the NVR?

Share this post


Link to post
Share on other sites

Hi. Looking at the manual for your listed nvr

its spec shows it is 960p and cameras are only 1mp

so it look very unlikely the unit can operate anything above that and the software will not allow you to go 5mp

Share this post


Link to post
Share on other sites
11 hours ago, tomcctv said:

Hi. Looking at the manual for your listed nvr

its spec shows it is 960p and cameras are only 1mp

so it look very unlikely the unit can operate anything above that and the software will not allow you to go 5mp

Hi,

The model I have installed is actually 2MP with 1080p cameras.

Then would it be possible to install peo cameras with the same resolution?

 

 

 

 

Share this post


Link to post
Share on other sites

Hi. Manual says yes via switch .... but it does not say if you can use other brands. 
There is no mention of onvif in its spec ..... which is a communication path for using between brands   So you might only be able to use same manufacture 

  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×