floureon cctv unit filmware needed

[lee_n_co 0]

Hi can any one help, I bought a floureon cctv unit a while back , was happy with it until a year later the unit decided to turn it self off then when it restarted the admin password had changed ? we never changed it cameras stopped recording and the unit would not let us access the menu until the password was entered after 3 or 4 attempts it locked the account and said I must get a super password from the suppler , no joy there and no joy from floureon web site , I did remove the internal battery to force a hard reset , left for 2 days and set the unit back up / the unit still will not let me in with out this password , I have tried all factory passwords so decided just to buy another unit / that was fine for about 5months no problems then same happened to the new unit / this is also asking for a new password .. bought a new unit checked my internet security etc all ok  this unit the 3rd one  has been working fine for the same about 4-5 months now I am having problems with that £80 a go I have 3 units / I want to fix these but cannot find a download site to find the firmware to reflash the units .. I take it this is a common fault due to all forums I can find (with out hitting them with a hammer how do I flash them and fix them)

what program do I need / ware do I find the software / can there be flashed using a HDMI or just the VGA lead

I am getting frustrated as no one can help with a easy fix 

[tomcctv 187]

Hi have you bought these recorders as a job lot ?

[lee_n_co 0]

no 1 bought one unit then a year later it stopped working the unit asked for a admin password could not reset set it so ordered a new one after 6months the same happened again with the new box cannot reset these boxes so i am looking for a software update so there go back to factory settings , I have bought another unit now this one is doing the same 

[tomcctv 187]

hi one of the 3 passwords below will unlock two of your recorders ….. all codes below are only valid for today

394236
167872
789224

the recorder marked 5 in 1 you will need this password 

816656

 

as far as software for password changing will not work as there is only firmware and it’s 5 years old and you need to be in recorder menu to update

 

as far as buying xmeye systems I recommend you don’t buy anymore….. you don’t have full control over the system once you register with P2P xmeye it stays with that recorder

 

there is a lot better recorders in the uk than xmeye systems

[seanable 0]

Mr Integrator,

I too have a Floureon DVR model# A6808MH  serial # 2020211985601 and no way to access it. I have attempted to contact Floureon support thru email a dozen times. 

Can I ask that you do the same as you did for the OP? It would be greatly appreciated.

[seanable 0]

PS I tried admin and blank password. I am able to view my cameras on my phone via XMEye. It logs in automatically. I believe I did set up a password for XMEye but cannot remember it. Thank you in advance.