Jump to content
Sign in to follow this  
Rick thomas

new to IP systems

Recommended Posts


1 hour ago, Rick thomas said:

General advice on cable splitters any one ?

 

Hi. For a IP system ….. a cable splitter would be known as a switch … what is it your looking to do

Share this post


Link to post
Share on other sites

i am looking to split an network point to run 2 x IP cams off it i will divert the connection from the existing network switch into my NVR and split the other end using a RJ45 splitter

 

Share this post


Link to post
Share on other sites
10 minutes ago, Rick thomas said:

i am looking to split an network point to run 2 x IP cams off it i will divert the connection from the existing network switch into my NVR and split the other end using a RJ45 splitter

 

Ok … would it not be easier to just go nvr to camera 

Share this post


Link to post
Share on other sites

No its a new build and i cant install any new cabling but the sparky has installed network points but there are two locations without network points hence i need to share 

Share this post


Link to post
Share on other sites
2 hours ago, Rick thomas said:

No its a new build and i cant install any new cabling but the sparky has installed network points but there are two locations without network points hence i need to share 

Ok then the best way is to use two power line units …. It’s cheapest and best way

they turn your existing power cables into network

something like this 

https://www.tp-link.com/uk/home-networking/powerline/tl-pa7017-kit/

 

Share this post


Link to post
Share on other sites
On 5/31/2022 at 5:52 AM, Rick thomas said:

i am looking to split an network point to run 2 x IP cams off it i will divert the connection from the existing network switch into my NVR and split the other end using a RJ45 splitter

So a mini POE switch? Like this mid-span one?

https://www.amazon.com/Loryta-Extender-Repeater-Ethernet-Splitter/dp/B07RQ569MF

 

There's also others labelled as 'POE extenders' with two (or even 4) ports.

This is a Chinese one from AliExpress. Does the exact same as the Amazon linked one above.

image.png.4a98c91acaa98de95b638283787cf626.png

On 5/31/2022 at 8:28 AM, tomcctv said:

Ok then the best way is to use two power line units …. It’s cheapest and best way

A POE powered and 2-port POE passthrough switch is plenty for most scenarios like this.

Share this post


Link to post
Share on other sites
1 hour ago, Mark_M said:

A POE powered and 2-port POE passthrough switch is plenty for most scenarios like this.

Hi yes it is except op did say can’t run cables to camera locations

plus you have given diagram for 650ft run which is also not needed

 

so a Poe switch with power adapter give the option to run 4 cameras with no cables back to nvr

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×