Jump to content
Esard

UL-TECH Wireless Camera resolution change

Recommended Posts

have a K8204-W NVR

Sequence number 9013160200

Software version 3.0.3.0

Video setting 1280 X 720

2 cameras

Name IPCAM

Video resolution 1280 X 720

2 cameras

Name 5322-W

Video resolution 2304 X 1296

 

NVR video manage page  has error message

Resolution to big for these 2 cameras.

 

Open the NVR management  in a web browser

On the setting heading page encoder settings

attempted to set cameras to 1280 X 720

When saving error message Permission denied  displayed.

 

How do I change the resolution setting for these 2 cameras?

 

Share this post


Link to post
Share on other sites

11 hours ago, Esard said:

have a K8204-W NVR

Sequence number 9013160200

 

Software version 3.0.3.0

 

Video setting 1280 X 720

2 cameras

Name IPCAM

Video resolution 1280 X 720

2 cameras

Name 5322-W

 

Video resolution 2304 X 1296

 

 

 

NVR video manage page  has error message

Resolution to big for these 2 cameras.

 

 

Open the NVR management  in a web browser

On the setting heading page encoder settings

attempted to set cameras to 1280 X 720

When saving error message Permission denied  displayed.

 

 

How do I change the resolution setting for these 2 cameras?

 

 

Are your cameras wireless

Share this post


Link to post
Share on other sites

Yes cameras are wireless so the only way to access the parameters is via the NVR web page.

Share this post


Link to post
Share on other sites
10 hours ago, Esard said:

Yes cameras are wireless so the only way to access the parameters is via the NVR web page.

Have you updated the nvr and camera firmware  since 2021 

 

Share this post


Link to post
Share on other sites

I have searched for firmware and tools to enable parameter setting to no avail. 

Share this post


Link to post
Share on other sites

Thanks for that however that only upgrades equipment does not allow parameter change.

I have now solved the problem.  Right click on NVR screen select System setup - System Admin - User - Edit user - tick all - OK - OK

Using browser enter the NVR IP and sign on using account (normally as set Admin blank password)

Select Setting - Encoding Settings Select the channel (1 to 4) - Select the correct resolution setting (available 1280 X 720, 1980 X 1080, 2304 X 1296) - save the change.

I now have all 4 cameras working correctly

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×