Jump to content
Sign in to follow this  
jamz

Morie type lines..

Recommended Posts

Hi,

 

I have a Pelco 9760 CCTV system with 20 Panasonic PT-D7700U DLP projectors and Spectra III cams.

 

 

occ.jpg

 

 

 

 

The screens that have CCTV video all have what seems to be dancing red/blue morie patterns. Almost like the pattern you see when you degause a CRT.

 

Anyone ever run into this before? Is this some type of interference or is it more physics - resolution between CCTV lens vs projectors etc...

 

 

Thanks..jamz

 

Similar to this sample on a CRT but not as bad..it more faint and dancing..

 

Degauss.jpg

Share this post


Link to post
Share on other sites

Hi jamz and welcome,

 

I can't comment on the specific equipment you are using (hopefully others will be along that are more familier with the kit), but performance testing is pretty much the same for any item.

 

It's probably best to keep things simple to begin with:-

 

Connect one single camera feed direct to a good quality test monitor, and see if the pattern is present, even to the slightest degree. If it is, it may be a transmission induced problem (or other).

 

If it isn't, then connect to one of your large display screens and see what the result is like.

 

Repeat with each individual camera to confirm that they are all working correctly. Only when you are satisfied with all the pictures, should you consider building up the display system in stages.

 

It is possible that there may be some degree of cross talk or interference being caused by the display system, possibly even a minor termination problem.

 

Good luck working your way through it!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×