Jtortola 0 Posted January 2, 2023 Hello and thanks for the help in advance. We have some older Panasonic CCTV controllers (WJ-HD616) that still run and have no plans on removing them for a while. With the removing of IE 11 to happen in Jan 2023, we will have no access to view through web browser. We do have a central location that has a full install of Panasonic security CCTV camera software so we are not dead in the water, but it is for management that access the controllers every once in a while through web that needs to be addressed. The cost for the Panasonic software is expensive a few thousand $ per install. Looking to see if there is any alternative, if someone has success for web browsing (Opera / firefox), I have tested but not done successfully as of yet..... Or if there is a software that is cheap that we can purchase and install. Any help would be great, Thanks so much! Share this post Link to post Share on other sites
tomcctv 187 Posted January 2, 2023 Hi. Yes ie11 problems but also pano problems as they dropped support back in 2015 for your units …. So what ever money you put into existing system is a waste depending on how many cameras and units you have it will be cheaper to upgrade and keeping existing cameras what is it your protecting Share this post Link to post Share on other sites
Jtortola 0 Posted January 3, 2023 Thanks for the help, It is a entire site complex. We have approximately 11 older controllers, mix between analogue \ IP cameras. I have identified this to management, and we are looking to eventually move to a new Eagle EYE setup, but want to enable a bridge before we get there. So we are looking to find a cheap alternative until we get there. Thanks for the help! Share this post Link to post Share on other sites
