imran.naseer

Well its samsung, and it would support samsung IP cameras; there should be no restrictions! But the brand must be samsung. any other brand may also work but not sure as I have not tried a mix. you will have to try yourself.

Well ... I was finally able to resolve the issue!! In my opinion the port 80 has been blocked by the ISP; and due to lack of complete information on part of the owner, I could not get the ISP to open port 80 for mobile connections. So, what I did was as follows: Changed the webviewer / HTTP port to 559 (this makes me manually put 192.168.x.x:559 to open the local webviewer) and also port forwarded the same, including the range 554-558. And .... now iPolis mobile works just fine. to reach to this point I had to go through intensive port checking and testing, as I was not able to open port 80 no matter what I tried.

Samsung equipment installed: SRN-1670D - NVR = 01 SND-7082 (internal Dome Camera) = 02 SNO-7082R (bullet camera) = 04 can not connect iPolis mobile... upgraded the firmware of NVR from 1.1 to 1.3 still not solved. Everything else is working OK. when i connect through smartviewer remotely, it just works like a charm! only error that i can track is that when i try to open the DDNS address in internet explorer it opens the IP address, but not the port. then i manually input the ":port#" then the live view comes up. explanation: i enter "www.samsungipolis.com/mycam" in IE9, the webpage goes from this to physical address like "92.59.87.123" and then stops. then i change this to "92.59.87.123:557" and the live view starts! CAN SOMEBODY TELL ME WHAT AM I DOING WRONG? maybe I have wrongly configured the port forwarding on my router? but if that was the case would the SmartViewer also not work... i want to connect to NVR through iPolis Mobile to be able to view all the 6 cameras like can do in smartviewer. some snapshots also attached.