Hi All, I am new and great info here
I have a XM board based DVR which had telnet access, send detect email was having problems and I upgraded the box with newer firmware. Now the telnet access is gone and the port is not available anymore.
FW version was "AHB7004T-EL_V4.02.R11.3070.Nat.OnvifC.20160524.bin"
I can unpack modify and pack the bin files, so what should I do to the FW to get telnet back?
Appreciate the experts advise.
/etc/init.d/rcS is like below;
#!/bin/sh
/etc/init.d/dnode
echo /sbin/mdev > /proc/sys/kernel/hotplug
mdev -s
mount -t squashfs /dev/mtdblock2 /usr
mount -t squashfs /dev/mtdblock3 /mnt/web
mount -t squashfs /dev/mtdblock4 /mnt/custom
mount -t cramfs /dev/mtdblock5 /mnt/logo
mount -t jffs2 /dev/mtdblock6 /mnt/mtd
mount -t ramfs /dev/mem /var
mount -t usbfs none /proc/bus/usb/
mkdir -p /mnt/mtd/Config /mnt/mtd/Log /mnt/mtd/Config/ppp /mnt/mtd/Config/Json
if [ ! -f /mnt/mtd/Config/HvrMode ] && [ -f /mnt/custom/HvrMode ]; then
cp /mnt/custom/HvrMode /mnt/mtd/Config/
fi
if [ -f /mnt/mtd/Config/ppp/3gdigal ]; then
chmod 777 /mnt/mtd/Config/ppp/3gdigal
fi
cd /usr/etc
./loadmod
ifconfig eth2 up
ifconfig eth2 192.168.1.12
echo 2548 > /proc/sys/vm/min_free_kbytes
routedaemon&
dogtest &
#BurnSataHub &
telnetd &
timecheck &
macGuarder &
sleep 3
netinit &
sleep 1
/usr/etc/pppd pty /etc/ppp/pppoe-start file /etc/ppp/pppoe-options &
/mnt/custom/extapp.sh &
#unrar x /usr/bin/Sofia.rar /var/
cp /usr/bin/Sofia.tar.lzma /var/
cd /var/
tar -axf /usr/bin/Sofia.tar.lzma
chmod 777 /var/Sofia
rm /var/Sofia.tar.lzma -fr
dvrHelper /lib/modules /var/Sofia 127.0.0.1 9578 1
