View unanswered posts | View active topics


Reply to topic  [ 2 posts ] 
Author Message
  
 Post subject: Lorex NR9163 - Camera Subnet Access
PostPosted: Tue Nov 14, 2017 12:11 pm 
Registered User

Joined: Nov 2017
Posts: 1

Offline
I have a Lorex NR9163 NVR with 12 cameras connected. I'd like to access the configuration pages of my cameras directly from my laptop, but it looks like the NVR blocks access to the cameras connected to its POE ports. Web requests and pings time out.

My network layout is as follows:
  1. Home Network Subnet (assigned by primary router): 192.168.5.0/24. NVR and laptop are on this network.
  2. Camera Subnet (assigned by NVR switch/router): 10.1.1.0/24

I've tried (without success):
  1. Accessing cameras with at 10.1.1.x from my laptop on the
  2. Plugging my laptop into an empty port on the back of the NVR and accessing cameras.
  3. Configuring a static route in my router for 10.1.1.0/24 (next hop to 192.168.5.5, the NVR's IP).
  4. Manually assigning a 10.1.1.x IP address to my laptop with subnet 255.255.255.0.

Unfortunately, Lorex NVRs do not offer the "Virtual Host" function available on the Hikvision branded units.

My questions are:
  1. Any ideas on how to access my camera configuration pages directly without plugging them directly into my primary home network switch?
  2. Is there any way to SSH into the NVR? Shell access seems to be disabled.
  3. Can I flash Hikvision's firmware to the NVR? If so, what is the Hikvision equivalent model number?
  4. Can the NVR be configured to forward DHCP requests to my primary router?

Thank you!


Top
 Profile  
Reply with quote  

  
 Post subject: Re: Lorex NR9163 - Camera Subnet Access
PostPosted: Sun Dec 10, 2017 7:54 pm 
Registered User

Joined: May 2013
Posts: 18

Offline
if u can not see the cameras after plugging them into a powered eithernet switch on your home network and u can't see them the you will need to change the ip block of your network... i couldn't see the 4k cameras when using 172.16.0.1 block...


Top
 Profile  
Reply with quote  

Display posts from previous:  Sort by  
Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Sat Feb 24, 2018 3:00 pm

The contents of this webpage are copyright © 2003-2016 CCTVForum.com. All Rights Reserved.