Dahua NVR4116H and D-Link DCS2121

Hello,

recently I bought 3 Dahua cams IPC-HFW4200S and a NVR4116H.

With these products of course the compatibility is the maximum and I have not any problem.

I have an old IP camera too, it’s a Dlink DCS2121. This camera is not an ONVIF cam.

This cam can supply different MPEG4 or MJPEG streams (with different resolutions and frame rate):

JPEG http://IPADDRESS/image/jpeg.cgi

MJPEG http://IPADDRESS/video/mjpg.cgi

MPEG4 or MJPEG rtsp://IPADDRESS:554/play1.sdp

MPEG4 or MJPEG rtsp://IPADDRESS:554/play2.sdp

MJPEG rtsp://IPADDRESS:554/play3.sdp

MPEG4 rtsp://IPADDRESS:554/3gpp

I tested the “generic cam” preset setup for this cam, the camera is recognized by the nvr (green (V) symbol), but after few seconds the symbol turn red (X).

There is a hope to connect this D-Link cam to a Dahua NVR?

Thanks for your help

Andrew

Hi,

I think that this D-Link camera is not compatible with the NVR Dahua.

I think that the NVR Dahua accepts only H264 streams, and the DCS2121 can supply only MPEG4 and MJPEG streams...

Andrew

Someone can suggest me how to convert the stream to show it on the NVR Dahua?