Help on Indigovision 9000 Encoder

Dear all,

I´ve been using some brands of encoders such as Acti, Bosch, Sony, Axis and Hikvision in some CCTV installations, and to check the encoder I use VLC and point to the URL of encoder´s stream like:

Acti: rtsp://admin:123456@192.168.0.100:7070/track1

Bosh: rtsp://192.168.0.100:554/video?inst=1

Sony: rtsp://admin:admin@192.168.0.100:554/media/video1

Axis: rtsp://root@192.168.0.100:554/axis-media/media.amp

Hikvision: rtsp://admin:12345@192.168.0.100:554/

I´ve tried to do this on a Indigovision 9000 encoder and did not worked because could not find how to contruct the URL on the Indigovision documentation. Even using a browser you can not check if the encoder is working, the user does not have any page showing an image.

Thank you for any help.

I am pretty sure they just use the straight IP address with nothing else required (unless you have a custom port).

Thank you for your answer.

I wil test it and will post the result.

Dear all,

Still trying,

rtsp://

rtsp://:554

rtsp://:554/lvcamera01.sdp

None of above worked. Any help is very precious.

Thanks a lot.

check out:-

http://www.indigovision.com/documents/partner/downloads/Firmware/Reprogramming%20Procedures%20-%20Tx%20Rx%20Cam%20Alarm%20Panel.pdf

pages 8 and 9 using comms connection.

and:-

http://www.indigovision.com/documents/consultant/guides/9k-Box-ConfigurationGuide.pdf

Hi,

IndigoVision products by default do not have an RTSP stream. The only IndigoVision products that do have this are ONVIF conformant products, you can find a list of these products at: http://www.onvif.org/FindaProduct/ProfileProducts.aspx

Thanks,

IndigoVision

Thank for the tips, I will check them.