raydaffurn

Just to confirm so i get this right: for the camera to dvr i need a female bnc to female bnc and to watch on tv i need bnc female to rca. Just want to confirm I need bnc female connectors. Also is there part codes for these as i have seen various ones, if you could confirm the correct one: bnc to rca: ax58 - ebay Item number: 320348468824, ab58? - Item number: 320346336766 and for bnc to bnc part ref rg58? and with the pigtail for the power supply how do i connect it up as i defo do not want to blow the camera, looking at pics of it i just cant work it out. cheers for the help so far.

i just sent you a private message with the address to the pics, i cant post it to the message as i am a new member so if you could that would be great. so to connect to the tv i would need bnc to whatever is on the back of tv and this goes in the loop bit. so to connect the camera to dvr is this bnc to bnc fem-fem? and the other one is a 12v dc power connector? info on the camera below: Image sensor Sony 1/3" color CCD and B/W CCD Resolution Color: 480 TV line , Black/White: 600TV line Color System PAL/NTSC Illumination 0.001Lux /F1.2, 0 Lux with IR LED on Effective night-vision range 50m-80m (with16mm lens, 45 degree) Lens 16mm IR LEDs 30pcs LED IR Led Average life 20,000 hours IR wavelength 84uint 840nM Scanning system 2:1 Interlace S/N Ratio: > 52dB Electronic shutter 1/50 - 1/100,000 sec White balance Auto Back Light compensation Auto Gain control Auto Video out 1.0V p-p 75? (BNC connector (male)) Operator temperature -20--+50 Power requirement DC12V +10%, 1,000mA (LEDs on) Dimension 120mm (Dia) x 220mm (L)

I am trying to set up a camera to my dvr and on the back of the dvr there is a loop and input connection for each camera (I think these inputs are called bnc inputs (male??) from googling it), on the camera i have there is 2 cables one is the same as the one on the back of the dvr and obvioulsy does not fit and the other cable i am not sure of. I just need to know what other cables i require to attach the dvr to the camera and also where each cable goes, this is my forst install so not got a clue about input loop or anything. Having a look on ebay there is a bnc to bnc (female to female RG58?) that looks like i would connect this to the bnc on the dvr then onto the bnc on the camera. The other one on the back of the camera maybe some sort of audio? if anyone can advise that would be great. Also how do i hook up to watch on a tv, its a new plasma so has various inputs. I have pics of this but cant post as i have just registered. Cheers