mkstretch

I hooked up the camera at the dvr to a channel that allows hd feed but still no luck. I just purchased a ground loop isolator to use at the camera. Also I’m not sure if I’m missing a setting on my dvr that changes the camera type to HDCVI. I only see HD resolution.

cam setting wouldn't cause lines, sounds like ground loop but more specific descriptions would be helpful. All I've got is you had a dvr it all worked, put in one new cam and it has lines. Just based on that recheck how you put the cam up, did you accidently give another path to ground, with a screw from the cam case, or something small like that.

Thank for the reply! I bought the flir DVR in order to use hd analog cameras. I hooked up the new HDCVI camera to the coax I had a non hd camera connected to. The non hd camera worked with no issues. Where would I check for ground? At the dvr or power supply?

I hooked a FLIR M4200 DVR with my analog cameras and everything worked. I then swapped out one camera with an amcrest HDCVI camera. This camera just shows rolling lines. It’s hooked up via coax cable. I’m not sure if the dvr needs to have settings changed? Anyone have any ideas?

Why do some DVR’S have only one audio in port? What if you have more than one microphone?

Oh ok thank you! I can’t seem to find one that has more than 1 audio input. I have a few mics setup.

I’m currently using a digital watchdog VMAX flex but want to upgrade to HD over coax(HD-CVI) any DVR recommendations. THANKS GUYS!

Will I get a better picture?

Are HD-CVI cameras compatible with an analog DVR? I have a digital watchdog VMAX-flex. Thanks!

Not sure if this belongs here. I have the ring doorbell pro hard wired. I am unable to get HD video at all. My router is about 20 ft away. My speedtest at the doorbell with door closed is about 90mbps download and 90mbps upload. I have a dlink router dir 890 try band. Any help would be appreciated. Thanks!

My power supply is make big like a clicking kinda sound and the green lights inside are flickering. My CCTV camera are also not coming in the picture is rolling and flickering. Any ideas? Thanks guys.

I installed a VmaxFlex 16 channel. I can view it from my phone when not at home, but if i try to on a PC it logs in but i cant view any live video. I can get into the setup screen, but no video. Thanks

Don't know about that model, but what ports did you open in the router? Possibly 80 and 1600?

I opened only one port on the router. I changed the default port of 80 to a new one on my dvr. That is what I used for my router. Their also was only one port listed on dvr under LAN setting

I have an everfocus ecor960 8F. I can remote view from my phone but on a computer I cannot. I forwarded the port on the DVR with the DVR's IP address on my fios router. Thanks

Ok this is crazy! I can view the cameras from my phone still, but now it won't work on my wife's work PC. I also tried from my verizon wireless laptop with no success.

I just tried it again with the no IP address and it worked. Very weird though cause it wasn't working earlier. Hey, thanks a million for taking the time. It's greatly appreciated!

Yes in the app im using TCP port. Yeah i type in the no-ip.org address it brings up my dvr but the address changes to my ip.

Hey one more question. When I type my no ip host name into the browser and it connects it shows my IP address not the host name. Is there a way to just have it show my no ip host name?

Oh I did get my iPhone app working because in the stup it asked for address and I was putting my no ip .org address and it wasn't working. When I entered my home IP address instead it works. It works which is good. But this doesn't seem right to me.

I appreciate the time and the help. One thing left is to get my smartphone app to connect. keep getting errors. Thanks

remote login is working now. But I had to change my host Type from DNS Host A to port 80 Redirect, and i went to whatsmyip.com website and used that ip for my computer on the no ip website instead of the usual router ip.

I put the settings in place and still cannont get into my dvr for remote viewing. Under DDNS settings on my DVR I put port 80. I port forwarded my TCP port and my HTTP from my DVR's network settings. I put my router ip I use to log into my router from home into no ip website settings. I dont know what Im missing.

Ok sorry to ask a million questions.

So for host type on the no ip website. Is DNS Host A the correct choice?

Ok so the http port under network setting port under ddns don't have to be the same?

In no ip I just use my router ip?

My http Port on my dvr is 8081 not 80. Also what about the settings on the no ip site. It also asks for an IP address. Thanks

under port I entered my HTTP port which I got from the network setting. is that right?

also i forwarded my DVR's TCP port, and HTTP port on my fios router. The install guys did enter my dvrdns host address into my fios router under dynamic dns setting.