justjohn

how do you set preset tours on avtech avc792d?

i have a avc792d hooked up to a vcl orbiter i can use ptz functions fine also preset positions. But how do you do tours.

Allso how do i access the vcl orbiter onboard menu from the dvr?

Dome and dvr are setup for pelco-d

i have it working on 1 pair for heater and one pair for camera power

24v 3a psu to camera power 50ft cat5e 1 pair

24v 1a to heater/blower over 1 pair

the specs on the vcl orbiter are very flexable regarding power ratings.

the problem i was having was due to a faulty fan on the blower.

i think it is now working 1 pair for heater and 1 pair for camera power.

Thought there was a 10%+/- discrepency with voltage requirements on cameras?

camera rotate/pan and tilt seem to work?

setup

vcl orbiter dome requiring 24v 1amp/heater 24v 500ma

45-50 ft of cat5e

Power supply 24v 3amp

I have used 1 pair for the power and bridged from the camera block connectors to the heater block connectors.(i do have 1 pair left spare, but i am not keen to hook-up/climb a ladder lol)

i originally had this on 150ft of cat5e the camera worked fine but i think the heater was not kicking in(condensation appeared after 1 day). i have now change it to the setup above. Camera works fine on 50ft cable just waiting to see if heater kicks in...

Should the above setup work???

How long does it take to clear condensation?(is that a chicken and eg question,lol)

How does the heater kickin eg drop in temp or if there is condensation?

eg is it possible that condensation is present but heater does not come on due to no drop in temp.?

The camera was a pain to mount on the wall, nearly 3 floors high and had to use a big ladder. i am not too good with hights lol