msimps6

I work in a retail building, and we currently have a direct setup (No Jboxes, etc.) with various Sensormatic cameras including SpeedDome2000 cameras with Unicards running on a ADTT16E controller. We are currently using the SensorNet wiring protocol.

We just acquired some more Sensormatic Speed Dome 2000 cameras with Dual Boards. These have no controls when hooked into our system. My guess is that the cameras are not currently set up to run on SensorNet.

My question is; what do I need to do to integrate these into our SensorNet system?

Thank you!

As mentioned above, I already have the cameras themselves.

Is this all that I would need to make it happen? http://www.surveillance-video.com/pebbspivbabo6.html

I have the same issue. I already have some PTZ's (attached), but I want to make sure that I just need the back box and bubble. Do all of the boards, mounts, etc. come inside of the back box when it is new so that the camera can clip in with the red/blue mounts and be functional?

We are looking to place cameras in the parking lot adjacent to our location.

We do have experience with wired IP cameras, but are new to wireless.

Couple questions:

1. We are looking into a housing like this: http://www.videotrec.net/wirelesshousings.html

a. Would we be able to place a WIRED IP (Geovision) camera inside of this housing, and gain wireless accessibility? Or would the camera need to be some sort of "wireless ready" or already wireless camera?

b. Does anyone have any recommendations of a housing to use (With heater and blower?)

2. What sort of reliable range should these wireless types handle? None of the cameras would exceed more than a couple hundred feet from the access point.

Thanks in advance for any info!