spe99
-
Content Count
42 -
Joined
-
Last visited
Posts posted by spe99
-
-
Actually I have only analog cameras since about 7 years and maybee I will upgrade to a Dahua XVR and buy HDCVI Cameras to use with my existing installation cables.
Which Dahua XVR 16 channels can replace my old Dahua DVR0804HF-U ? (I'd like to have possibility to add IP camera and also PTZ in the future.)
What will be a good deal ?
-
yes sure, I don't whant to buy another unit for the moment.
Maybee, later I can move to a XVR, but for the moment it's not my priority.
-
ok. Many many Thanks !
Have a nice week-end.
Best regards
-
Hi
thanks for quick reply.
Yes, I'm using it since many years ago and this unit working very well.
Now, I'd like to change my old Cameras because it's 420 TVL...
I'm not a "King" on CCTV System... I try to add the better analog Camera and not sure which one will be the good one because I can find I lot of possibility (for example on Ebay) but specification from seller are often Comic I think...
What's the maximum Resolution compatible with this DVR on Analog input ? 700 TVL ? 800 TVL ? 1000 TVL ? I fund 2 Mp Camera but on CCTV Analog it's not possible 2 Mp or ??
Many thanks for help.
Best regards
-
Hi,
Is it possible to connect a HDCVI Camera (like Dahua HAC-HFW1200R) into a Dahua DVR0804HF-U analog DVR ?
Thanks for help.
Best regards.
-
Hi,
Nobody can help me please ?
Regards
-
Hi,
I tried to update the firmware but I have the error message " Open file failed! "
The file on the USB key is: DH_DVRxx04HF-X-E(V2.0)_Eng_P_V3.200.0003.4.R.20170816.bin
Why it doesn't work ?
Any idea ?
Thank you.
-
Hi,
thanks for reply.
And the Dahua DH-SD42212T-HN is working also with this DVR ?
Manx thanks.
best regards
-
Hi,
I tried to update the firmare dut I have the error message " Open file failed! "
The file on the USB key is: DH_DVRxx04HF-X-E(V2.0)_Eng_P_V3.200.0003.4.R.20170816.bin
Why it doesn't work ?
Any idea ?
Thank you.
-
Thank you !
best regards.
-
Hi,
What's the difference between these 2 Firmware ?
DH_DVRxx04HF-X-E(V2.0)_Eng_P_V3.200.0003.4.R.20170816
and
DH_DVRxx04HF-X-E(V2.0)_Eng_N_V3.200.0003.4.R.20170816
Sound'like the same, only one letter change ! P and N ??!?!!?
My DVR run actually with System 2.608.000.0 Built date 11-08-2011 Web 2.1.7.29
My DVR work great, but I need upgrade it with new Firmware ?
Thanks for your help.
Best regards
-
Hi,
What's the difference between these 2 Firmware ?
DH_DVRxx04HF-X-E(V2.0)_Eng_P_V3.200.0003.4.R.20170816
and
DH_DVRxx04HF-X-E(V2.0)_Eng_N_V3.200.0003.4.R.20170816
My DVR run actually with System 2.608.000.0 Built date 11-08-2011 Web 2.1.7.29
My DVR work great, but I need upgrade it with new Firmware ?
Thanks for your help.
Best regards
-
Hi,
Is it possible to use a Dahua SD22204T-GN IP Camera on a DVR0804HF-U ?
Or this Camera is only a stand alone Camera ?
Is it possible to connect on the DVR with dDMSS Lite and use PTZ command for this IP Camera ?
Thanks for your help.
Best regards
-
Hi, I don't fund a solution for my Problem. Sorry, I can't help you
-
Hi,
Many thanks for replies and suggestion.
My DVR is a Dahua DVR0804HF-U DVR.
Yes the mic is powered and directly attached back to the DVR to make sound check.
I will try again this week-end.
Best regards
-
Hi,
I have Audio Problems with my Dahua DVR:
I tried to add an external microphone with the CAM1 on my Dahua DVR.
I undersand that 4 RCA input on back panel are for Channel 1 to 4 and for 5 to 8 (or to 16) the connection is thru DB25 connector.
I try to check the box "Audio/Video" on the "System Config, Encode"" for the Channel 1. (This box is unchecked for all other channels)
I can't hear any audio on the "Channel 1" RCA !
Just a small sound on Channel 4 RCA connector !
I tried to connect the MIC to RCA 1 to 4 and I can only listening to a small audio sound when the MIC is on the RCA channel 4 attached !
The mic is a small "Surveillance RCA CCTV Mic Microphone Sound Monitor CCTV Sound pick-up Camera " like this one:
My questions:
- Are this sort of microphone a joke or usable to hear audio on DVR ?
- If I check the channel 1 "Audio/Video" box on the DVR, I can only hear the microphone sound attached on the channel 1 RCA connector ? (I f I check the Channel 2 is only RCA Channel 2, etc.)
- Where can I find pinout for this DB25 connector. Anybody have this pinout ?? (nothing on the manual)
Many thanks for your help.
Regards.
-
Hi,
I also have Audio Problems with my Dahua DVR:
I tried to add an external microphone with the CAM1 on my Dahua DVR.
I undersand that 4 RCA input on back panel are for Channel 1 to 4 and for 5 to 8 (or to 16) the connection is thru DB25 connector.
I try to check the box "Audio/Video" on the "System Config, Encode"" for the Channel 1. (This box is unchecked for all other channels)
I can't hear any audio on the "Channel 1" RCA !
Just a small sound on Channel 4 RCA connector !
I tried to connect the MIC to RCA 1 to 4 and I can only listening to a small audio sound when the MIC is on the RCA channel 4 attached !
The mic is a small "Surveillance RCA CCTV Mic Microphone Sound Monitor CCTV Sound pick-up Camera " like this one:
My questions:
- Are this sort of microphone a joke or usable to hear audio on DVR ?
- If I check the channel 1 "Audio/Video" box on the DVR, I can only hear the microphone sound attached on the channel 1 RCA connector ? (I f I check the Channel 2 is only RCA Channel 2, etc.)
- Where can I find pinout for this DB25 connector. Anybody have this pinout ?? (nothing on the manual)
Many thanks for your help.
Regards.
-
Hum... sorry, I need to wake-up now !!
Yes it's working well now.. " title="Applause" />
Sorry..
Thanks.
-
Account is OK now, but always the same problem: only 1 CAM viewable.
-
Hi Rory,
Thanks for reply.
I try this one, but bad news: I have this message: "Prompt, window 1, user has logged in !"
why ?
-
Hi,
I'd like to do a remote view with my Iphone ans my Dahua DVR.
I downloaded de iDMSS software and made setup.
Unfortunately, I can view only 1 Camera.
For the second one, I have a message "The account is already in use" ???
In the DVR setup, "Max Connection = 10"
If i'm loggeg with my Desktop PC on DVR configuration, I can't view CAM on Iphone (same error message)
Where is the problem ??
Any idea ?
Thanks for your help.
Regards.
-
I try to update to 100724, but alway have error: " No thumb drive! ".
I copy the file on 1 Gb USB stick, like
x:\dvrupgrade\AL9216_T091028T090604T100724T100724.sw
or
x:\AL9216_T091028T090604T100724T100724.sw
or
x:\dvrupgrade\AL9216_T091028T090604T100724T100724.sw
and
x:\AL9216_T091028T090604T100724T100724.sw
But always the same error ! " No thumb drive! "
USB Stick is OK because I can format it with the DVR....
grrrrrrrrrrrrrrrrr.
Any idea ?
Thanks
-
Have the same unit Label on bottom DVR16B-57AG V2.0 V100128 - Flashed to new SW/FW @ Q-See web siteProduct Model Number: QSDR16RTCB-500 Discontinued
http://www.q-see.com/products/security-product.php?ProductId=204 Firmware 100724 Download
16 Channel H.264 Network DVR with Real Time CIF Recording and mobile phone surveillance and 500GB Hard Drive
Also D/L'ed the latest standalone viewer / Phone Viewer / Multi user viewer under the software section tab, all work great. The product could be much better but didn't shell out the $15K plus for a Pelco
Was your DVR a Q-See to begin with or a None Branded one like mine? The only reason why I'm asking that is because yours had the v100128 which is listed on the Q-See Support Site but mine is v100806 and I don't see that in the list
Hi !
Mine is V1.0-V091118. What is the most recent ??
With my DVR, I can't view with Iphone and also direct with my PC. Hope this firmware corect this bug ??
regards.
-
Hi.
I'm PAL, but all DVR are NTSC/PAL switchable no ??
regards
HDCVI Camera on analog Dahua DVR ?
in Digital Video Recorders
Posted
Any comment about ?
Thank you.