Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by vin2install

  1. vin2install

    MicIn Setting not working

    Still the same whether its a powered mic or not. That line in functions the same.
  2. vin2install

    help connecting DVR to macbook

    November was a while ago. Most likely it has been overwritten and lost forever.
  3. vin2install

    MicIn Setting not working

    Line in and Mic in are technically the same aren't they?
  4. vin2install

    HD DVR with old camera compatability

    google quadbrid dvrs
  5. Why not just use the vga to composite convertors and encode them to onvif streams? Seems cheaper that way.
  6. Satellite would be fine. Make sure you go with Excede instead of Hughes because Hughes requires a static IP for remote viewing or other functions you might need. Usually you would only consume the bandwidth against the cap when you are looking at it remotely. It wont use a lot when it is sending alerts here and there.
  7. Whats that white thing on the ground? I think i saw that somewhere in movies before.
  8. It can sms through email. http://www.wikihow.com/Text-Message-Online
  9. Have you tried to put a router behind the router (double nat) to see if it is the google router?
  10. vin2install

    Decent DVR client for OS X?

    Why dont you just start using DVRs that have dedicated Mac clients from the start?
  11. vin2install

    DVR restarts by itself

    It could be the hard drive. Try disconnections the hard drive and let it run to see if it still restarts.
  12. vin2install

    Night Owl DVR-16B57AG - Email Alert Issue

    Try using port 587 and make sure POP is enabled in your gmail settings page.
  13. vin2install

    HD SDI Camera Power

    I know one company has power over coax and SDI What happens when that one company goes out of business? Than run the extra 18/2 ?
  14. vin2install

    file system iCATCH DVR X11 series

    Are you able to read what kind of files are on there?
  15. You might be pulling the substream on your Tablet and pulling the main stream on the RTSP which is higher resolution hence the slight delay compared to the substream.
  16. HD Witness works with linux and doesnt use that much of CPU resources. Even an Intel atom can handle 16 x MP cameras.
  17. Your CPU usage shouldn't be that high for only two cameras on HDWitness. Check how much bandwidth those cameras are consuming by clicking on the "I" on the top right of the cameras.
  18. vin2install

    DynDNS Alternatives?

    You can use No-IP, it doesnt require a credit card. Doesn't Asus routers have free DDNS of their own? http://asusddns.appspot.com/
  19. vin2install

    HD-SDI Over IP

    I actually think the encoder is a good idea. I dont see why it would be so expensive since the DVR is a lot cheaper now.
  20. Did you upgrade some new firmware or update the Exacq software within the last three weeks?
  21. What VMS are you using? Sometimes the VMS will send certain CGI commands to make the cameras lose connectivity until a reboot of the camera is done to restore functionality.
  22. Don't most cameras keep the same FOV? 1920x1080 Main Stream 640x360 Sub Stream
  23. The Effio and Next Chip are DSPs. The Super HAD II is the CCD sensor.
  24. vin2install

    Running HD-SDI Cameras Over Cat5e With Baluns

    Yes http://muxlab.com/product?product=hd-sdi-balun&pid=876