Jump to content

mrngoma

Members
 View Profile  See their activity

  • Content Count

    9

  • Joined

  • Last visited

Posts posted by mrngoma

  1. Posted

    Dear all,

     

    I have problem with more than 73 cameras (Dellmeier Model DF3000A) showing this message when power on:

    Dellmeier electronic Camera

    Cam_inPIX

    Version ML 2.4

     

    Can someone gave me solution? Should i replace all these cameras? and what are the causes, as all these cameras run under UPS clean power, other 62 remaining cameras are working?

     

     

    please assists.

     

    Erasto

  2. Posted

    Thank you Tomcctv,

     

    I cross checked link you sent me and dvr I have is not nano type, its EH111H-4+ so can you send me recovery firmware for this?

     

    Thank you,

     

    Mr Ngoma

     

     

     

    Dear Tomcctv,

     

    Kindly send me file to load, i have no lucky after remove hdd..

     

    Warm Regards

     

    Mr Ngoma

     

    Hi everything sent to your pm

     

    This is the new firmware.

     

    Extract from your PC to memory pen .... Insert pen into dvr then start dvr up

     

     

    At the end you will be asked to insert cd key ..... Use the serial number on back of your unit instead

  6. Posted

    Try to update your dvr with latest firmware version first.

     

     

    Heya all! I've been installing these DVR: http://surveillance.aver.com/product/embedded-hybrid-DVR-EH1116H-4-Nano-series for my restaurant that is in a mall.

     

    The thing is that I can't watch my DVR outside of the restaurant. I know that I have to open the ports (I've already installed one of these before) and all that stuff, the only problem is that the mall have some internet restrictions, and they assign an IP for every local on the mall and I cant figure out how to set the network configuration for static IP, since I have a router and it shows an IP, but when Im trying to configure the DNS it shows another IP. I spoke to the IT members of the mall and they told me that I have to create a VPN connection before trying to connect to my DVR, I already create the VPN on my computer but still, cant watch the cameras. I set the network configuration of my DVR to Static IP adress which I reserved on my router, but I dont know if I must set the network configuration to PPPoE, since the internet provider doesnt work with dynamic IP's.

     

    Thanks a lot for your help guys!

×