RyanRhey

This my Problem with my system right.

im confuse about the intel chipset not compatible but they do not reccommend the AMD.

Same problem with GIGABYTE board. i think the board has a compatibility error which totally freeze the system.

Right now i use ASUS board waiting for the problem to rise. same procie,memory built in VGA.

I have also same problem with this one both IP cams and Analog cams. system always Freeze without any reason we already conducted several test but still FAIL! together with Geovision.

I think the system doesn't compatible with the GIGABYTE board all do we use high motherboard specification.

- now we were changing board system. i use ASUS motherboard 6 series chipset. compare to what im using before the GIGABYTE 7 series chipset. Hope it will work. same Procie, memory and built in videocard.

oh thank you so much for this specification

ive already install 4gb memory and the manufacturer says that the built would be okay.

but still im still experiencing especially in 16channels up.

thanks

Goodday!

I have a GV card 3008 8channles, i used two card for to get a 16channel input video.

heres the CPU specification

Intel i core 3. 3.20ghz

2 gb memory

built-in video card

2tb harddisk

Gigabyte B75-HD3 motherboard

windows 7 starter 32bit license

all recording video was saved on the same HDD where the OS was installed.

===========================================================================

my Problem is that the system always hangs.

1. already reinstall OS, Reformat

2. already reinstall GV card driver and software

3. check system faults but negative.

4.connection, grounding everything is okay.

the system sometimes run for a long period of time then again it hangs.

all parts are brandnew.

=========================================================

i already replace the card with a new one. one card has the problem the driver always lost when the system restarts. i replace with the new ne but still the same

please help me. i dont have any solution of this. thanks

okay thanks, still system hangs.

can i use these card.

Sparkle GT210 1gb DDR3 64 Bit

thanks for my system. please help thanks

would you recommend a video card brand and specification.??

is their a direct contact between the two video card and the gv card. thats why the system hangs up.

the built in video card is high definition integrated video card. and the latest system architecture vs AGP series.

that's why i used the default system.

can you help me out sir?? still system hangs. i don't know why.

Goodday!

I have a GV card 3008 8channles, i used two card for to get a 16channel input video.

heres the CPU specification

Intel i core 3. 3.20ghz

2 gb memory

built-in video card

2tb harddisk

Gigabyte B75-HD3 motherboard

windows 7 starter 32bit license

all recording video was saved on the same HDD where the OS was installed.

===========================================================================

my Problem is that the system always hangs.

1. already reinstall OS, Reformat

2. already reinstall GV card driver and software

3. check system faults but negative.

4.connection, grounding everything is okay.

the system sometimes run for a long period of time then again it hangs.

all parts are brandnew.

=========================================================

i already replace the card with a new one. one card has the problem the driver always lost when the system restarts. i replace with the new ne but still the same

please help me. i dont have any solution of this. thanks

how can i set my geovision software video location save output.

the word "set location" is not clickable. system only saves on my HDD where my Os was installed

thanks.

Works fine on windows 7, ive already installed CMS on my IPHONE.

VMCS = for the Administrator type software

iCMS = for the Client type software or just to view the whole thing

ahhh the configuration of the CMS on your PC.

ive already configure mine too.. first know your public address if you apply for a public ip address or your static ip address.

type the address on the CMS software, the port you use, the DVR name, the user name and password.

you must use other internet lease network not your internet network because your using your own IP address for viewing when establishing a CMS connection.

upon successfully connect just tabulate the devices under the DVR name of your device and drag each camera activate under the name of your DVR to the blank squarebox to view each camera.

thats all.

im using also h264. dvr HD-SDI and analog

HDMI port.

4TB HDD

i think the problem is on the cameras Flex connectors

this is true....

Ive already use this system POWER + DATA + VIDEO over coax. for PTZ camera.

easy to assemble easy to use. less roughing ins, less wire, less troubleshooting

the brand is See Eyes.

Goodday!

I have this Problem with Regards with PTZ connection RS485.

My PTZ camera has only one pair of connection for RS485 which i think is RX.

I have already configured all my 4 sets of PTZ camera already connected to my PTZ controller and all run smooth and Good.

My Dilemma is How i do i connect the All PTZ in series of wire connected to the PTZ controller, I have 7 sets of PTZ camera and the 3 doesn't yet controlled.

It is safe to interconnect all the RS485 RX of my PTZ the Positive and the Negative then tap it on my one port of my PTZ controller then set the PTZ address form 1 to 7.

... ive already set a PTZ camera in chain and the camera has 2 pairs of wire the TX and RX. itap the 2nd camera RX to the 1st camera TX and this how the chain goes on.

but with this one i bought has only 1 set of wire RX.

Please help me badly need feedback today

Goodday!

I have this Problem with Regards with PTZ connection RS485.

My PTZ camera has only one pair of connection for RS485 which i think is RX.

I have already configured all my 4 sets of PTZ camera already connected to my PTZ controller and all run smooth and Good.

My Dilemma is How i do i connect the All PTZ in series of wire connected to the PTZ controller, I have 7 sets of PTZ camera and the 3 doesn't yet controlled.

It is safe to interconnect all the RS485 RX of my PTZ the Positive and the Negative then tap it on my one port of my PTZ controller then set the PTZ address form 1 to 7.

... ive already set a PTZ camera in chain and the camera has 2 pairs of wire the TX and RX. itap the 2nd camera RX to the 1st camera TX and this how the chain goes on.

but with this one i bought has only 1 set of wire RX.

Please help me badly need feedback today

Thanks

Hi!!

I have this PTZ camera with a 24 volts AC power supply

I connect the AC 24 volts to its AC 24 volts Wire!!! and it doesnt move or nor display.

= i check the power supply 24 volts AC and its working!!

= i open the top case of the camera looking for te FUSE and its working it has a continuity check.

= i look for some connectors and press it firmly!! and its good!

=i check the wire connection for 24volts AC and it has a continuity!!

the DIP switch are all in default position what should i need to test to look for its defective parts!!

"i buy the item from korea, but the packaging is right!! does the too much vibration can affect the board??"

PLEASE help me badly need it by saturday!!!

Hi! goodday! to all

Newbie here!!

thanks