rory

which version are you using, and what is your screen resolution? Rory

You mentioned a Via Motherboard, does it have a Via Chipset? Sometimes it will work fine, sometimes not, more times not though. Its best to always stick with an Intel Chipset. Could just be a bad card, or if the software is not legit you may also experience those issues (hacked drivers related to the DVR card hardware)

Hi Chad, whats a 2 prong adapter? Thanks.

thanks .. a clients actually .. if it was mine I wouldnt mind so much

Yeah I like the GE because they typically accept either or, plus do 10-30volts.

Dont feel bad. .. i think I just fried a Sanyo Day Night Vandal Dome the other day when I hooked up 12VDC and it was setup previously for 24VAC .. didnt get any video but had to leave the location so wont know until tomorrow or the next day .. kind of sucks as that was a nice camera .. if it is fried that is .. i could have just loosed the video cable from inside the camera by mistake when I was messing with it, Im hoping that is it

VST, goto explorer, start to click through folders, back and forth. Watch as it will "hang" here and there, or lag. Now goto Sounds and turn of the Navigation Sound. It will be 100% faster, like it is supposed to be. Its a known problem with this Sound Max version right now on all boards, Asus or not, running XP. Some people may not notice it though, but I tweak XP to the max so I notice every little thing. Also the P5B-Deluxe has had terrible reviews from day one, ofcourse I didnt go looking for them until after i bought it and encountered all these issues. Many of those that are using seperate sounds cards will never notice the problem ofcourse, but to me that is just a bandaid and the board still is not worth it. As to the P5L-MX, thats a whole other story, but its a different Sound Max version. @Lolo, no nothing will fix it besides disabling the Navigation Sound, Disabling All Windows Sounds, or Disabling the onboard audio all together. Ive decided to dump Asus for right now due to these problems, and go with the GigaByte as they don't use Sound Max. When and if Sound Max [and Asus] ever get their problems soughted out, then I may look at Asus again. Its just too much money to have problems like this, and on multiple boards, and Im certainly not alone so its a manufacturer wide problem.

LOL .. now they dumb .. they had a guy here steal from a truck right in the alarm companies car park one day .. he walked up to the camera, I mean he was just right in front of it .. face clear as day, actually was still daylight .. though they havent caught him yet I dont think ..

im still looking for the high res .. would be perfect ... will see what I find .. also, once we find the manu we can then find out from them who retails/distributes the products.

Hey .. found it .. this has the exact same specs and is identical in its design .. as i matched it with one i just took out of a box here .. http://www.koreacctv.com/eng/product/product_view.php?ac_id=79&ai_id=12 BUT, they dont have it in high res Yeah these are so discreet and easy to mount too .. for the night club .. thats why I like them so much .. they kind of suck when there is alot of light .. but then its a nightclub and thats rare .. Seems the Koreans call these PIPE cameras instead of Bullet cameras .. so will keep searching for a high res one, a high res PIPE B/W camera ..

Hi Scorpion, I just noticed that ECL-377 is from Korea, so I will look around a bit .. be nice to have that in High Res also .. Also, i need some mini board cameras that are close or the same as that .. to put in some WizKid WZ30 Dome housings .. the cameras they came with suck big time, so much so I never mounted all of them ... and yes these are also for nightclubs The bullets are easier to mount IMO, though the vandal domes we wanted as people started to break up the bullet cameras! Thanks, sent INWT a PM Rory

that all depends on the clients though. .

Yep, also its only 510(H) x 492(V) effective pixels as opposed to the typical 811(H) x 508(V) with high res cameras.

LOL .. that driveway is fine .. the cement has cracked up over the years from the heat though I expect .. its a Straight 6 4.0 .. I imagine its a small block now though I dont know much about engines.

There are a few dealers on the forum that may see this thread, and you could also check out the advertiser banners at the top.

Budget Rock Bottom Color bullet: 380TVL camera 320x240 from DVR: AmCap - no compression - 720x480 (enlarged from default res)

actually Im using 8.1.2 now

Yes, they stopped selling them though .. which is why Im looking .. plus im looking for the same but in High res now

Ask them what they are willing to spend. I would ditch the 600 and go at least with the 650 ..

Down here, the DSL business package for $99 a month only gives them 128 upload speed .. if they want something that matches the Cable Business Package (basic is $150 a month), they have to pay DSL $490 a month. So obviously we dont use DSL for remote video down here

Whats the Microwave dish? I need something for my parents in the outislands here .. how far does it go and what kind of licensing is required? Thanks! Rory

It really varies, some people have decent results, some dont. Its just another obstacle to deal with, when there IS a problem with the Camera's Video. So best to use the correct cable the first time; if possible. If you cant get siamese, no worries, you can still buy RG59 Solid Copper Center and Outer Copper Braid, from most stores that sell wire, such as one that caters to Electricians. If you can find Copper RG6 then great

Did you check your Regional and Language Settings in the Control Panel? English should be default. If you cant access the settings, see this page: http://www.pctools.com/guides/registry/detail/1215/ You can either set it to English, or just delete the approriate item and the key from the registry, reboot and it should be English again. Otherwise it is suggested to use the settings in the control panel. If it is set to English already, then thats a different issue. Make sure the Geo software is an original CD, so that the language settings on the CD has not been modified. BTW, if you can, check out V 8.12. Register and login at EzCCTV.com to download that. It has additional features like Remote View Log and System Idle Protection.

No, was RemovePass .. not online anywhere.

i thought I found out where 8.0 keeps its passes but i was wrong .. anyone else know? Otherwise the fix I have is for versions earlier than 8.0.