-
Content Count
58 -
Joined
-
Last visited
Posts posted by kelvin
-
-
I have a customer wish to install camera for his shop in Cosham and Purbrook, U.K. If you are interested for it, kindly PM me your email and contact and i will pass you the customer contact details.
STRICTLY FOR SERIOUS BUSINESS ONLY!!!!
-
hi... nice to meet you in cctvforum
im kelvin from kl
-
Im looking for the camera which suitable to install at oil & gas factory. it can be IP cam or analog cam. Please do suggest me some reasonable price product due to i need to install 40 units of it.
also i heard there is a germany manufacturer produce ip cam which suitable for oil and gas. any of you heard this manufacturer before?
Thanks.....
-
Hi Kelvin:Try Rutherford controls website. They do make sliding door locking hardware and they are good as far as quality and reliability. Hope this helps m8.
thank you very much.... i will chech it out with them
-
Please download the PDF document. All picture will be show. you may direct download from the link.
Hotel Sliding picture download here
Instruciton:
1. right click on the link
2. select "save target as"
3. click on save
This hotel is currently using analog door lock which require use key to open the door. Currently they wanted to upgrade all the door to digital door lock system. Here is the problem:-
1. the hotel door is a sliding type. It is not those common type we usually see in hotel which is push/pull to open/close.
2. they are not allow us to install electromagnetic lock(EM lock) or magnetic sensor.
3. Im allow to change / modify the door lock to digital lock (use card to access)
4. Please do not propose / recommend door access system because this is a hotel.
5. Please provide me a solution / product brand / website / company name / .... etc. Any information that could help me.
Your comment / suggestion for me is important. thank you
-
Its not like the old days when you would have to cleave and polish, confirm that you have a good straight cleave and then terminate which would take 15-20 minutes. We use there kits and connectors and now have th terminations down to a few minutes each, tops.......Wow... sound interesting. Just like what "Wachhund" said, In my location most of the technician will be send to training and then cert by some organization. Since you have been using optimax fiber kits before. Do you get the same quality and performance as old time which need to clave and polish? What about the costing? will be be the same or lower?
As i know fiber optic usually divided into single mode and multi mode then follow by how many pair/s fiber optic(correct me if im wrong). Can your tool kits support?
The quality is the same, the biggest difference is the actual connectors cost just a little bit more but you make up for it on the time saved. I've done the old polishing methods (I used to teach certification courses for copper and fiber) and its the same in the end.
Typically we run 6 strand indoor/outdoor multimode fiber. The cost difference between 4 and 6 is minimal and two 2 strand is typically used for patch cables, you never know when you will need that extra pair. If you need to get it with more strands you can get it. They have break out kits if you need it.
Here is the brochure for the kit
Im thinking to invest on optimax. Just like jeromephone said, a good tools is important. According to your experience, optimax doesnt give you any failure so far right? besides tools kits, do i require a tester? any good tester with reasonable price recommend?
-
It is a Linux Embedded DVR from Cybervision. If you need further information, i can PM you the person contact email.
-
Its not like the old days when you would have to cleave and polish, confirm that you have a good straight cleave and then terminate which would take 15-20 minutes. We use there kits and connectors and now have th terminations down to a few minutes each, tops.......Wow... sound interesting. Just like what "Wachhund" said, In my location most of the technician will be send to training and then cert by some organization. Since you have been using optimax fiber kits before. Do you get the same quality and performance as old time which need to clave and polish? What about the costing? will be be the same or lower?
As i know fiber optic usually divided into single mode and multi mode then follow by how many pair/s fiber optic(correct me if im wrong). Can your tool kits support?
-
I did find some info on google, but majority is only tell the theory on fiber optic. I need info on how to do the whole operation from A to Z.... haha... sound greedy rite..... at least one person share the experience and whole bunch of us benefits..... thanks
-
I'm pretty sure the good termination and splicing equipment has some internal QC testing. I mean it's impossible to polish something that small using only you eye.at least somebody could tell us their bad experience and make us to be aware if we got the same situation. just like we comment and give advice on the RG cable to the fresh entrance to cctv business
-
I have my own technician to do the wiring and installation on the RG cable. Im thinking to upgrade self knowledge to know how to run fiber optic surveillance. Exp. What I have to be careful during install fiber optic cable, converter and during testing and commissioning. How many type of fiber optic equipment usually apply to surveillance and etc.
I have no experience in fiber optic system.
-
scorpion, most other countries dont have much drywall homes as you guys have in the US .. Id imagine he is talking a brick wall.Also, I doubt he has Radio shack in his country, and even if there is, like here, it may be very limited
You are right... In my country, we are all using brick wall and we do not have any radio shack in Malaysia.
In my place there are no such thing as BNC wall plate and I do search google. wish that from here could get some reliable supplier with quality product.
-
I have a job which require to hack the wall and conceal the RG6 cable. Anyone who know where can i get a BNC wall plate and the outlet? It can be F type or any other type as long as it fit the RG6 BNC
-
put a camera on a remote control car and let them drive that around the place remotely ..Setup a dark room with some infrared cameras .. let them take pictures of themselves to show their friends how they look in infrared lighting ..
Get a vandal dome and a sledge hammer, let them try to break your dome camera .. make sure the camera can actually take the beating first though
Fish tank with underwater camera ...
Free beer
Basketball hoop shootout, winner gets a camera
haha.... it really sound interesting....
let me go through with the developer......cheers....
-
Im having another headache job which need to setup a alarm, cctv and intercom, photobeam detector system in an exhibition. Normally ppl just putting up some system and show to customer. But I dont feel it will attract customer because everyone is doing the same.
Any idea of how to make it interesting? Or you have seen any which is really attractive. Is better if you have a photo or video which can show me some example.
Ohya... forget to tell that this is an small exhibition because we are invited by a housing developer. They need us to show the system will be using in their coming housing project. for exp, simple cctv system will be use and no complicated and high-end camera is using like PTZ.....and etc. Of course the budget is small....thanks ya....
-
Hi all.... thank for your comment ....
Currently i had a solution but do not know whether it will work or not....just to share with you all....
Each system video output will install a active balun to boost the signal to 8th floor. so at the 8th floor will locate a video distributor for each system to distribute the signal to rest of the floor. Do you think it will work well?
-
I only see Aztech power line product in Malaysia. Anyone use this before could give some comment on how well is the performance? is it exactly same as a pulling network cable(for cat5 less than 90m)?
-
wooo...sound like a new tool for me.... anyone can brief explain what is power line because I only thinking to using video distributor/multiplexer/setting a network .... but I don really have confidence on the video signal since I have to spread it into so many monitors
-
I have a job on hand which is install 4 PC based system for a hotel. 4 system will be install at the basement control room and they require to view the 4 system at 8th floor,9th floor and 10th floor.
No LAN/WAN provide. What solution do you think is the best way to distribute the video to the 3 floor with no worry on video/signal loss.
-
I have my own Installer team. So no problem for install anything
-
Recently I have received some enquiry on Night Vision Camera. Capable to zoom in 500M range in total darkness.
Camera to be install onto a oil tanker for surrounding surveillance.
Simple configuration will do, one camera with monitor at wheelhouse with full zooming control.
I like to know whether you have the solution for the above? If possible please specific the brand and modal....thank you
-
I had the problem also when i was using the Argus board...
-
I know in Malaysia there one DVR can work with MAC..
but i think i cant help you in your location....
So sorry....
-
you may try this no-ip.com
Any system installer or supplier from Cosham and Purbrook,UK
in General Digital Discussion
Posted
thank scorpion.... i will pass this information to my customer.
also how can i join this forum dealer section. wish to see the world trend, technology and business culture. sometimes we may just share the different way culture of business.