wkdwrx

thrres about 10 cameras that do it turn on have power leds work the circutboard gets warm but no video

oh and 1 camera works perfect but the menu is stuck on I have swap a lead over from another dome camera and did nothing when puh the little control up and down nothing happens its just stuk on\

but lets focus on the other problem first getting power and no video

now how do a replace a bnc on camera end ? I thought there were the same as bnc leads get rg59 cable but they are not its a yellow wire and a black wire or do I need one of these in pic

yes I hook one up the camera board gets warm

Camera Specifications:

•Image Sensor

1/3" Sony Super HAD CCD2

•Lens Size

2.8 - 12mm

•System

PAL

•Valid Image

976(H) x 582(V)

•Resolution (Horizontal)

700TV Line

•LED

21pcs

•IR Irradiation Distance

20m

•Video Connection

BNC

•Video Output

1.0V(p-p)(75 Ohm, Negative)

•S/N Ratio

>52dB

•Minimum Illumination

0.001Lux/F1.2

•Electronic Shutter

1/50~1/100,000sec

•Operating Temperature

-10ºC to +50ºC, RH 95% Max

•Input Power

12V DC ( ± 10%) / 350mA

•Dimensions

Diameter 127(W) x 127(D) x 95(H)

I have a test monitor but no multimeter im buying one on the weekend as I work nights and sleep days

hi thanks for reading this just a few questions . I was given some cameras cause they are faulty . theres a few dome and a few bullet . the domes have leds and same as bullets.

the problem is they are faulty . he said they may be fixable .now when connect power and connect the bnc there is no picture . but if put your finger over the ir the leds turn on so there is power going to the cameras . could it possibly be dodgey bnc ends on the camera ? I have pulled a couple of the cameras apart unply and plug the connectors and still no video .

any help or ideas would be excellent

hi all I bought a few used cameras and in the box there a couple ip cameras all my cameras are analogue so I know I cant use it on my dvr I got told but am I able to hook up power to it and use the bnc plug and connect it to my tv just to see if works or cant do that ?

hi all was just wondering if anyone has ever seen or used one of these ptz cameras what are they like ect

I don't need one I was asking how do you hook them up as it was a question I seen them but was curious as to if goes to camera end or dvr end or does it matter what end .

hi all just a quick question as I have said once before im new to the cctv scene slowly learning more.

question about the ground loop isolator does it go from the back of dvr to the camera bnc lead or the lead from the camera then bnc lead ? or can you hook it up anyway ?

ok I had the sparky come back over I got him to put a new fan switch on the wall and try that did nothing . I bought one of the ferrite rings and did nothing .

its weird only does it when view it on hdmi on tv in room

cause as said above from the recorder to wall place have the hdmi and bnc leads running under house drill hole in floor and connect both into back of wall plate . if use the bnc to tv its fine tuen fan on does nothing . then connect hdmi from wall plate to tv turn fan on black screen for a sec then speed 2 black screen for a sec . I got him to do it to see if the computer monitor under house does it when the tv does it . and no it don't the only thing the computer monitor did when he did it was topleft corner got a lil fuzzy when he turn the fan speeds

its a ceiling fan and its a round switch . no dimmer no nothing just speed 1 2 3 off . and the wall plate is about 2m away from where the fan switch is

bump anyone ?

and beside the hdmi on wall plate I have bnc . I ran a bnc to tv and don't cut out when turn fan on or or only hdmi does . weird very weird

hi al I have a question for yous . all my dvr is under the house . I ran a hdmi lead under house and I dril a hole in floor where wall is and the hdmi lead plugs into the back of a wall plate . then a hdmi lead goes to tv . well the problem im having is when I turn the fan speed up or down its like the tv screen turns off and back on but the hdmi lead is nowhere near the fan switch . when its on dvd player it don't do it only when viewing the cameras on tv .

the only time I used my brain to lol

well it cost me $130 aus for the camera and I don't have any cameras in my house all outside and cost me $3 so yes was worth it esp when im workn 2 jobs paying a house off alone so $3 saved me wasting a $130camera lol

ok well I put on here a couple months ago I drop my camera like 1 foot from the ground it slip out of my hand when picking it up and it smash the glass in the centre piece where the lens is .

here is a update well I rang heaps of shops none of them has 1.1mm round glass or able to cut it 28mm round plus prob a waste of time for them . I ran out of ideas and thought hmm whats the time and it hit me the glass from a watch face. so I look them up on ebay found 1 place in uk im in Australia and they had 1.1mm by 28mm round glass . I hit buy it now they sent it to me 3 weeks later was 48mm lol so email them back they send me another one 28mm what do you know it fit perfect .

I clean all inside got all broken glass out wipe it out bought the right glue that you mix was for plastic and glass I used a broken tooth pick ran glue all around the inside of plastic pushed the glass in wipe off all wet glue from the front and looks perfect let it dry no leaks I fill the inside og face with water and yeh no leaks which is good cause cameras out side .

so yeh heres some pics

ok I went and bought a hdmi cable I plug it in the back of the dvr where says digi out I connect it tv and says does not support . so I unplugged it try it again does not support so I guess its not a hdmi .

do I bought a vga to hdmi converter its a proper one goes by power and holy moly massive difference .

still keen to know what digi out means

so its deff hdmi ? cause I look it up and it only says vga video out . but on the back of the dvr says digi out and looks like a hdmi port

please delete this thread

hi all how are yous just a couple questions .

what do people use to view there dvr . computer monitor ? tv ?

I wana view mine on tv I been using monitor out from dvr to tv in bedroom and realised on the computer monitor under house where its all hooked up in a room under house the 9 squares fit in the computer screen perfect so that's vga to computer monitor . on the tv its monitor out on dvr to tv by bnc lead all the 9 squares are to big for screen so don't get all full pictures .

so im getting my new dvr has vga hdmi and monitor out . what would be best hooked up to my tv in room vga ? vga with bnc lead ? hdmi ?

ok forget about the jokes please so this dvr is no good .

its $650 aus its for my house . and don't wanna spend much more then that I know you get what you pay for . but when payn a house off alone its a lot of money . I need to buy one in a week cause im on a weeks holidays and want to install it . and my cameras are 700tvl

anyone

hi all im thinking buy a new dvr as im not happy with my ge dvr 30 not very good pic quality and when play back it got very slow pause takes like 1/2 sec to pause and play back is disgusting .

im thining of buying a new 16ch dvr heres the specs I just wanna know if its any good

This listing is for 16 ch standalone dvr.without hard driveThis is FULL D1 16 ch which means records16 ch at d1 resolution at the same time.Most of the dvr on ebay are D1 but not all 16 channels.( pay attention on other listings) High deffinition output ,HDMI ,VGA and BNC output.This unit weights 6 kg without hard drive.Any questions are welcome.This is proffesional unit.I'm sure the installers know what 200 FPS at D1 resolution means>this units sell for around $1000 + trade price .If you need a hard drive let me know. I can install for you 2 or 4 tb at additional cost.

◇16-Channel H.264 Network Digital Video Recorder (16CH × D1 )

◇Video Compression: H.264; Video System: PAL/NTSC

◇Video input/output: RCA 16-channel Input and 1-channel RCA Output and

1-channel VGA Output; VGA Resolution: 1024x768,1280x1024；1-channel HDMI output, ESATA Out

◇Audio input/output: BNC 16-channel input/ BNC 2-channel output

◇Alarm input/output: 16-channel input/2-channel output

◇Display resolution: D1 704 x 576 (PAL); D1 720 x 480 (NTSC)

◇Display frame rate: 400fps(PAL);480fps (NTSC) (shared by 16 cameras)

◇Recording resolution: D1 704×576 /CIF 352×288 (PAL); D1 720×480 /CIF 352×240 (NTSC)

◇Recording frame rate: D1@400fps/ CIF@400fps ( (PAL); D1@480fps/CIF@480fps(NTSC)

◇Playback resolution: 8 x D1

◇RJ-45 Ethernet connector; Support Static, Dynamic IP and Support TCP/IP, PPPOE, DHCP, DNS

DDNS, UPNP

◇ Support Internet Explorer, Mobile phone and special client software

◇With RS485 x 2, 2 × USB, 1 × IR Controller , 1 × USB2.0 mouse, PTZ

◇Support PELCO-P&PELCO-D PTZ control

◇Support 2 SATA Hard Disk inferface (4TB in total)

◇Multi-language OSD

◇Dimension: 405mm×330mm×65mm (LxWxH) Weight:6.0Kg

Warranty 2 years.