gonzogg

For the price is not bad. Night picture is not very good

Here are some screen shots.

Wao! that is genius! With ONVIF device manager I was able to create a new admin user and change the settings of the camera. Now I am in. Thank you very much 51cent.

I bough the camera in the below link. Yes, I know, I shouldn't buy unknown cameras, but it was cheap enough and I want it to try it. The seller is not help at all. They told me the default IP was 192.168.1.123 and the login credentials, admin, admin. I had to use wireshark to discover the IP, which is 192.168.1.66 and the credentials admin, admin, do not work. I need to login to the camera to change the IP address so it match my network. I was able to make the camera work with Milestone Xprotect Go, but it won't allowed me to change the IP though there. I am looking for any suggestion on how to login to this camera.

http://www.aliexpress.com/item/1-3-PoE-Cable-Night-Vision-CCTV-Millions-HD-IP-Digits-Infrared-IP66-Waterproof-Network-remote/32596547492.html

Combine PIR-sensor and Arduino-Ethernet.

I always want to try this solution, but I have not experience with Arduino. Have anybody try this solution and care to share?

Thank you buellwinkle, I lowered the live view resolution on Milestone and now CPU load is about 50% average.

I am running 8 cameras at 3 MP

I am using Milestone XProtect with Hikvision cameras and I am happy so far. However, when I use the web client to see the cameras or the mobile application it bring an i7-3930K 3.2 GHz to its knees (100 % CPU use).

Do you know of a simple IP Camera Viewer Application for windows just for live viewing that can take the H.264 stream from the camera?

I do have an exterior PRI connected to a Hikvision DS-2CD2732 camera and it works great. I do get some false alarms in a windy day, but I think if I lower the sensitivity of the PRI it will take care of that. I only use it for the camera to send me a text if motion is detected. I only have one in front of the house and I would like to the the same for the back and sides of the house. The idea of doing it with a Raspberry Pi or an Arduino sounds very interesting and economical. But I have not found any evidence online that it will work with a regular external PRI instead of the small naked toy like PRI that you can buy for this devices.

buellwinkle, Do you know if the Arduino works with a regular PRI, like an Optex LX-402?

PoE switch is fine. I replaced the cameras with another ones, and they are using the same switch PoE ports. I have the three damaged cameras on my desk and they work with external power supply, but not PoE.

I just used an external power supply in one of the cameras and it works. No luck with PoE so far.

I did covered the cameras, but not the connectors, and I didn't use the waterproof adapter that came with the cameras (big lesson learned). People make sure to waterproof the Ethernet connector. The plugs looks ok, however, the led doesnt't turn red when I connect the camera to the switch, like no power is getting to the camera. That's why I think it was a short circuit.

I covered all the cameras and sprayed for spiders around the house. It looks like liquid got into some connectors and ruin 3 cameras. I am assuming because a short circuit. Any idea if this cameras can be fixed?

They are Hik DS-2CD2032-I

Email notification on my Hikvision cameras stopped working. Everything worked fine for a week and without changing anything, it stop working.

The curious thing is, it works with a regular email address, but not with with a cell phone email to text address. I though the cell phone provider (AT&T) was blocking this emails, but, if I send an email from the email account it reach the cell phone.

Cam sending email to username@yahoo.com, it work

Cam sending email to cell_number@txt.att.net, don't work

PC sending email to cell_number@txt.att.net (Using the same account that is setup in the cam), it work

I have also tried another cell provider with same results.

Have anybody ran into this issue?

Thank you all for all the suggestions!

I am only testing from the LAN (wifi). The phone and the tablet are connected to the wifi. They are all in the same network segment. I can ping the NVR from the tablet. I don't believe is a network connectivity issue. I though it may be something silly in the NVR config.

Did you setup a VPN or port forwarding?

 

Have you tested on your LAN wifi network?

I did setup port forwarding, and yes, I did tried the local network (wifi). I also tried from a tablet on the LAN and same results

I have tried iVMS-4500, however, I am getting "Connection failed"

These are my settings:

Alias: NVR

Register Mode: IP/Domain

Address: NVR IP (Local)

Port: 8000

User Name: admin

Password: ****

Any suggestion?

I bought NVR DS-7616NI-SE from AliExpress. What is a known android app that work with this NVR for remote viewing?

mturley, what command you use to debug email?

Firefighter, I noticed your videos on youtube are very smooth. I am curious about your settings about Resolution, Frame rate, Max. Bitrate and I Frame Interval.

I have tried many settings, but my video is still not smooth.

I have X-Protect Go installed in a Windows PC and all works fine. I tried to install it in a Windows 8 machine and the mobile server fails to start, it says something about the credentials not being right. Any suggestion?

 

- add the relevant info under the NAS tab. case is not relevant.

- use a "/" in front of the share name (important - will now work without it)

- HDD shows "Offline" under Storage Management tab

- reboot the cam

- HDD shows "Online"

- format

I do have NFS share working with FreeNAS on 5.1 firmware, however, I can't make CIFS work with FreeNAS. On the camera settings I am adding the path for the NAS the same way I do it for the NFS share. I am missing something? The path for CIFS share have different format?

For some reason I cannot get CIFS working with FreeNAS. What are the setting you are using for CIFS?

Where can I get the official 5.1 firmware, Chinese version?