so that why i have video flicker

can any one help when i connect balun like top setup in photo i get lines on the screen but when i connect it like bottom image it works fine any advice thank

hi the office computer that we use to program the cards in to the pac 2 system died so we replaced it plug in the network cable fom the pac system to pc but cant find network can i input the network the setting in manuley and if so do you know the network setting to put in thanks

hi just been asked to look at a dvr 16 ch all was working for a week then he lost hdmi port vga still worked checked log to see hard-drive error then check in hd menu to find no hard-drive unplug power popped lid off plug power in no power to unit unplug hard-drive then it would power on fitted new hard-drive not power on plug lead in lights up 2 seconds then off again any one know were to start ps i change power supply as well

hi iv got a 2mp 3000tvl ahd cam had 3.6mm lens but image was to close /small so i tuck a 2.8mm lens out of a 1200tvl cam and fitted it in now my ahd image looks squished from left to right any one help out with this thanks

ok today i swoped the hdmi socket now the striped pic is clear but then when pic swops over the brand logo then tv shuts off so i turn it on and there is no image but got image on vga ???

can any one shed some light on the got another dvr and this one only showing colour strips on screen going top to bottom the first boot screen thanks

Hi what type of strips ?

 

Is dvr new or old......?

 

 

just like you pic and its a old sunluxy one 5l-d1o8

can any one shed some light on the got another dvr and this one only showing colour strips on screen going top to bottom the first boot screen thanks

Yes that could also be a problem

 

That would not give the problem you have with vga...... did you check PAL NTSC

it was set to pal so swoped it over to ntsc still the same then back again i think iv got 1 a bad hdmi port and 2 a bad graphics processor

o-wh_Lpv5FI

 

Hi a few tests ..... what happend when you startup with no cameras attached.

 

What happends when you startup without the Hdrive connected

Also how are you connecting to monitor

 

hi thank you its the same with or with out hd and same with or with out cams

and if i run it throw the vga it locks like loads of squares very blocky like a old pc with no graphics

 

Does it stay on via vga ?

 

Lots of squares and blocks is also a sign of being on wrong format

PAL or NTSC ...... try changing it ...... menu on dvr

just had hdmi under the scope https://youtu.be/ASY7O4rXhno

o-wh_Lpv5FI

 

Hi a few tests ..... what happend when you startup with no cameras attached.

 

What happends when you startup without the Hdrive connected

Also how are you connecting to monitor

hi thank you its the same with or with out hd and same with or with out cams

and if i run it throw the vga it locks like loads of squares very blocky like a old pc with no graphics

can anyone have a look at this i put vid on youtube brand new dvr seller no replying any one know how to fix it thank you https://youtu.be/o-wh_Lpv5FI

hi guys need a little advice iv got 2 dvr,s one sannce and one sunluxy

when i had the sunluxy in i lost all internet when i unplugged the Ethernet cable my home internet come back on and now today my sannce dvr reboots like every 2 mins

i unplug the Ethernet cable from the new router and the dvr stays on no rebooting but the min i plug network cable back in to router the dvr starts rebooting again any on shed any light on this

hello can any one help iv got a sunluxy SLDVR4-4600 when i turn it on i get the 4 cam on screen put i have no menu the power light is on the run light is flashing i press any buttons and i get a bleep but still no menus so cant program it