prsmith777
-
Content Count
27 -
Joined
-
Last visited
Posts posted by prsmith777
-
-
I have Gv-2008 cards which have a DSP out built in. I cant seem to get any of my IP cameras to show up on the DSP. The analog come over great and look wonderful on there.
Is there some setting in the software I am overlooking?
Thanks!
-
You would think.
I am not familiar with that card, however, so I cant help you. Perhaps the manual?
-
Turns out my cable was bad.
-
I realize this is 3 years old. But I recently tried to get this to work again and cant seem to get it working right.
I have tried putting the 6 pin cable in all different combinations to connect the 2 gv-2008 cards and still I cant seem to get 16 cameras to output through one card for the TV out.
Andy, if you are still here, please help.
-
Any word if the DevKit will be upgraded to the M14 specs as well?
-
Here is some pricing I got from a dealer today
The WVCW504F are$ ......... (list $973.00)
the WVCW504S are $...........(list $991.00)
Significant discount was offered.
Should be in real soon
PM for details if interested..
-
Its on the US panasonic website and is becoming available now.
Anyone?
-
LMVZ3510-IRThats the manual iris version.
This is the auto iris version:
LMVZ3510A-IR
-
When is Panasonic supposed to release the WV-NP502? It was shown and ISC West and won an award and also showed at IFSEC 2009.
http://www.panasonic.net/pss/security/products/nw/nc00.html#WV-NP502
It is listed on the Panasonic global site as coming out Summer 2009, but isnt on the US site.
When I tried calling US Panasonic, I was told a representative would call me back...that was a week ago....
The specs look good.
Did anyone see this cam? Is it worth waiting for?
-
There was a bit of a discussion when they were first introduced a few months ago http://www.cctvforum.com/about13580.html
Havent heard much since then around here. Anyone know of on the market cameras that are available yet? Im in the market for upgrading my home system and these look interesting.
General info here: http://www.sony.net/Products/SC-HP/cx_news/vol52/pdf/featuring52.pdf
-
Update:
Here is the list I got from Geovsion. First list is the current list for 8.2 and second list is for 8.3. They've added alot more cameras. Also there are more that are not on the 8.3 list as stated above.
V8200 IP camera Support List
Total: 51
Dev0 = GeoVideoSVR
Dev1 = GeoStandalone
Dev2 = AXIS_211
Dev3 = AXIS_213
Dev4 = Panasonic_BB_HCE481A
Dev5 = Panasonic_BB_HCM381
Dev6 = Panasonic_BB_HCM331
Dev7 = Panasonic_BB_HCM311
Dev8 = SONY_SNC_RZ50N
Dev9 = SONY_SNC_RZ25N
Dev10 = SONY_SNC_CS50N
Dev11 = AXIS_206
Dev12 = AXIS_207/AXIS_207W
Dev13 = AXIS_210
Dev14 = AXIS_211A
Dev15 = AXIS_216FD/AXIS_216FDV
Dev16 = AXIS_221
Dev17 = AXIS_225
Dev18 = AXIS_212
Dev19 = AXIS_214
Dev20 = AXIS_231D
Dev21 = AXIS_232D
Dev22 = AXIS_233D
Dev23 =Panasonic_BB_HCM403
Dev24 =Panasonic_BB_HCM371
Dev25 =Panasonic_BB_HCM110
Dev26 =Panasonic_BL
Dev27 = SONY_SNC_RX550N
Dev28 = SONY_SNC_CS10
Dev29 = SONY_SNC_CS11
Dev30 = SONY_SNC_P5
Dev31 = SONY_SNC_P1
Dev32 = SONY_SNC_DF40N
Dev33 = SONY_SNC_DF70N
Dev34 = SONY_SNC_DF50N
Dev35 = SONY_SNC_DF80N
Dev36 = Mobotix_M12
Dev37 = IQEye_702
Dev38 = IQEye_301
Dev39 = IQEye_302
Dev40 = IQEye_510
Dev41 = IQEye_511
Dev42 = IQEye_701
Dev43 = AXIS_207MW
Dev44 = AXIS_223M
Dev45 =GeoNessy2IPCam
Dev46 = JVC_VNC20U
Dev47 = JVC_VNC215U
Dev48 = JVC_VN_C655U
Dev49 = JVC_VN_C205U
Dev50 = JVC_VN_C625U
V8300 IP camera Support List
Total: 101
Dev0 = GeoVideoSVR
Dev1 = GeoCompactDVR
Dev2 = AXIS_211
Dev3 = AXIS_213
Dev4 = Panasonic_BB_HCE481A
Dev5 = Panasonic_BB_HCM381
Dev6 = Panasonic_BB_HCM331
Dev7 = Panasonic_BB_HCM311
Dev8 = SONY_SNC_RZ50N
Dev9 = SONY_SNC_RZ25N
Dev10 = SONY_SNC_CS50N
Dev11 = AXIS_206
Dev12 = AXIS_207/AXIS_207W
Dev13 = AXIS_210
Dev14 = AXIS_211A
Dev15 = AXIS_216FD/AXIS_216FDV
Dev16 = AXIS_221
Dev17 = AXIS_225
Dev18 = AXIS_212
Dev19 = AXIS_214
Dev20 = AXIS_231D
Dev21 = AXIS_232D
Dev22 = AXIS_233D
Dev23 =Panasonic_BB_HCM403
Dev24 =Panasonic_BB_HCM371
Dev25 =Panasonic_BB_HCM110
Dev26 =Panasonic_BL
Dev27 = SONY_SNC_RX550N
Dev28 = SONY_SNC_CS10
Dev29 = SONY_SNC_CS11
Dev30 = SONY_SNC_P5
Dev31 = SONY_SNC_P1
Dev32 = SONY_SNC_DF40N
Dev33 = SONY_SNC_DF70N
Dev34 = SONY_SNC_DF50N
Dev35 = SONY_SNC_DF80N
Dev36 = Mobotix_M12
Dev37 = IQEye_702
Dev38 = IQEye_301
Dev39 = IQEye_302
Dev40 = IQEye_510
Dev41 = IQEye_511
Dev42 = IQEye_701
Dev43 = AXIS_207MW
Dev44 = AXIS_223M
Dev45 =GeoNessy2IPCam
Dev46 = JVC_VNC20U
Dev47 = JVC_VNC215U
Dev48 = JVC_VN_C655U
Dev49 = JVC_VN_C205U
Dev50 = JVC_VN_C625U
Dev51 = SONY_SNC_RX550P
Dev52 = SONY_SNC_CS50P
Dev53 = SONY_SNC_RZ50P
Dev54 = SONY_SNC_RZ25P
Dev55 = SONY_SNC_DF40P
Dev56 = SONY_SNC_DF70P
Dev57 = SONY_SNC_DF50P
Dev58 = SONY_SNC_DF80P
Dev59 = ARECONT_AV_1300
Dev60 = ARECONT_AV_2100
Dev61 = ARECONT_AV_3100
Dev62 = ARECONT_AV_5100
Dev63 = ARECONT_AV_8360
Dev64 = JVC_VN_V25
Dev65 = AXIS_241Q
Dev66 = ARECONT_AV_3130
Dev67 = AXIS_216MFD
Dev68 = AXIS_211M
Dev69 = Canon_VB_C50i
Dev70 = Canon_VB_C300
Dev71 = SONY_SNC_RX530N
Dev72 = SONY_SNC_RX570N
Dev73 = SONY_SNC_DM110
Dev74 = SONY_SNC_DS10
Dev75 = SONY_SNC_DM160
Dev76 = SONY_SNC_DS60
Dev77 = SONY_SNC_CM120
Dev78 = SONY_SNC_CS20
Dev79 = AXIS_210A
Dev80 = Panasonic_NS202A
Dev81 = Panasonic_NW484
Dev82 = Panasonic_NW964
Dev83 = Mobotix_M12D_Web
Dev84= Mobotix_M12D_IT_DNight
Dev85 = Mobotix_M12D_Sec
Dev86 = Mobotix_M12D_Sec_R8
Dev87 = JVC_V686U
Dev88 = JVC_VN_V26
Dev89 = AXIS_209FDR
Dev90 = AXIS_209MFD
Dev91 = IQEye_703
Dev92 = IQEye_705
Dev93 = IQEye_752
Dev94 = IQEye_753
Dev95 = IQEye_755
Dev96 = SONY_SNC_RX530P
Dev97 = SONY_SNC_RX570P
Dev98 = Pelco_SpectraIV-IP
Dev99 = Pelco_IP110
Dev100 = Pelco_IP3701
-
I got a response from Geovision support that GV8.3 is coming out in February. The only thing I know about it is that it will improve/allow adding IP cameras to the gv-2008 cards and that Arecont H.264 IP cameras will be supported.
Does anyone know what other improvements are coming our way?
-
Here is the response I got from Geovision support:
Thank you for contacting GeoVision Technical Support.
In V8.2, we do not recommend adding IP channels to GV-2008 systems. However, the problems will be fixed in V8.3, which should be released in February (ie. you can add IP channels to GV-2008 systems in V8.3). Please find attached a list of supported cameras in V8.2 and V8.3. We have since then added Arecont 5105 to the V8.3 support list (ie. you will not see 5105 on the list, but it will be supported in V8.3). Please contact us in February for V8.3 software download.
If you have further questions, please do not hesitate to contact us.
Best Regards,
Ray Lee
Of note, there was no attached list of compatible cameras. But the h.264 are supported as the 5105 is covered. So that is good news!
Anyone know anything more about 8.3?
-
I wouldn't be suprised to see Ganz H.264 not too far in the future.Here they are, coming in January..
-
I have two GV-2008 on a 16 analog cam system and am looking into moving to some IP cams.
I found the following list of supported IP cams posted in here in May 2008 by Andy Chen. Was wondering if there are any new cams that have been added to the list. In particular I am interested in the Arecont H.264 cams, especially the AV5105
Here is the IP Camera Support List...
GV-IP Camera
GV-Video Server
GV-Compact DVR
AXIS_206
AXIS_207 / AXIS_207W
AXIS__207MW
AXIS_210
AXIS_211
AXIS_211A
AXIS_212 PTZ
AXIS_213 PTZ
AXIS_214 PTZ
AXIS_216FD / AXIS_216FD-V
AXIS_221
AXIS_223M
AXIS_225FD
AXIS_231D+
AXIS_232D+
AXIS_233D
IQEye_301
IQEye_302
IQEye_510
IQEye_511
IQEye_701
IQEye_702
JVC_VN-C20U
JVC_VN-C205U
JVC_VN-C215U
JVC_VN-C625U
JVC_VN-C655U
Mobotix_M12
SONY_SNC_CS10
SONY_SNC_CS11
SONY_SNC_CS50N
SONY_SNC_CS50P
SONY_SNC_DF40N
SONY_SNC_DF40P
SONY_SNC_DF50N
SONY_SNC_DF50P
SONY_SNC_DF70N
SONY_SNC_DF70P
SONY_SNC_DF80N
SONY_SNC_DF80P
SONY_SNC_P1
SONY_SNC_P5
SONY_SNC_RX550N
SONY_SNC_RX550P
SONY_SNC_RZ25N
SONY_SNC_RZ25P
SONY_SNC_RZ50N
SONY_SNC_RZ50P
Panasonic_BB_HCM110
Panasonic_BB_HCM311
Panasonic_BB_HCM331
Panasonic_BB_HCM371
Panasonic_BB_HCM381
Panasonic_BB_HCM403
Panasonic_BB_HCE481A
Panasonic_BL-C10
Panasonic_BL-C30
Arecont_AV-1300
Arecont_AV-2100
Arecont_AV-3100
Arecont_AV-5100
Sincerely,
____________________
Andy Chen
Technical Support, GeoVision Inc , Taiwan
+886-2-8797-8377 with extension 287
-
I am moving to a new house and would like to try my first ptz. I have a budget of up to 3k. I need it to be stealth as the neighborhood rulebook is larger than our phonebook and would like to put it in recessed surface mount on the top of a pyramid roof. see pic..
With the camera being basically upside down like this, am I going to run into problems? I figure I need 240 degrees to cover the grounds.
I need high zoom factor with excellent low light but no IR and I need excellent auto tracking. No need for fast ptz. I live in the south so Im not sure I need any special housing....in fact Id like to use a smoked glass to hide it.
Any thoughts guys and gals?
-
I do have the cable connecting the two cards. Maybe I have it connected wrong. I fiddle with it.
I thought the cable was to allow all 16 cameras to work on the dvr software.
-
-
One last question:
Is there a way to send an alert when someone logs on remotely to your server?
THat info would be very usefull.
-
the format is 1234567890 at mms dot att dot net
where the number is your area code and number.
It should work with other carriers if you research.
-
Ive managed to send alerts through my email account directly to my phone using att. I use (cant post this yet....dont have enough posts) and it sends emails with the pics. xxxxxxxxxx is my phone number including areacode. Other carriers I bet would work also.
NO need to buy a dedicated SMS device. Of course I have unlimited bandwidth account on this phone. This is very cool, especially when on vacation and no one should be in the house.
Question/problem:
each email has about four pages, though. The firs three are pages of all my account info, including ip address for webserver, rpb, etc etc. Doesnt seem very safe and it clogs up my phone. I just want the pic and the time only. Is there a way to edit this?
THanks
-
Has anyone noticed that when using the multiview product through a web or lan connection that when you double click on an image it goes to a single size... this is how it used to work. When you double click it again, it doesnt return back to your original quad or 16 view, whatever you used to have. you have to right click and uncheck full screen.
What a pain in the rear. Its not like that on the full version.
Ive tried this on XP and Vista... same problem.
-
each dsp seems to work independently.
Looks like Ill need a videomodulator to distribute throughout the house....
oh well
-
OK I tried a y splitter from both rca out to one input on the monitor and it is all messed up.... that doesnt work
computer maxing out on GV-1480 card
in Geovision
Posted
Im getting PC resource in the 90-99% range on a Geovision 1480B card with Intel Core7 4770 on an ASUS H87 Plus motherboard, 8 GB RAM Windows 7 64. Im using the onboard graphics from the motherboard. What first brought my attention to this was a 4-5 second lag between IP and analog video.
I've got 9 analog cameras and 16 IP cameras.
Would the GV 5016 drop my resources much? Is it worth the upgrade?
I tried turning various things on and off and the biggest resource hogs were the analog cameras and digital matrix. If I shut down the analog cameras, resources drop to the 30s; stopping digital matrix drops resources into the 60s. Turning off prerecording helps a bit as well. I tried a decent add on video card, but that didnt help much at all.
I guess I could migrate everything to IP but thats gonna be costly.