linix86

Yes, you can get into the Camera Interface as long as you have the latest FW on the NVR. If you have the latest., go to Configurations--> Network Settings--> Check Enable Virtual Host. Now go to Camera Management and you will see a link to the camera.

 

What FW version do you have on the NVR.

 

Here is the Latest one if needed. :

http://www.hikvisioneurope.com/portal/index.php?dir=Product%20Firmware/Recorder/DS-7600NI-SE%207600NI-V%28VP%29/V3.0.10%20Build141125/

 

Also after you upgrade your FW for the NVR, make sure you delete the web browsers history and exit your web browser, because you will not see the new settings if you do not do that.

thank you very much, I solved, thanks

Hello, I have a nvr Hikvision 7616ni-se/8p and would like to know how to access the individual cam to change values day / night and the like. Unfortunately I can only access NVR while the cam no because the poe ip class goes on a different and you can not set the same class ip between nvr and poe

up

Hello, I have an analog video surveillance system with DVR ganz and use the dms software for viewing. I also have a video surveillance system with ip nvr Hikvision and Use IVMS 4200.

I would like to know if it is possible to view all cameras with a single software. The whole plant is local and I do not need to put it in remote

Hello, I would like to buy a nvr Hikvision DS-7616NI-SE/P and I would ask if I can record at 1080p on 10 channels simultaneously

Hi, as the title suggests I would like to know if there is a nvr Hikvision or other brand that has the ability to turn off the cameras and

turn on via a command sent on the I / O contacts

Thank to all, the firmware indicated above it has been very helpful to also update other cameras in my possession. Thanks so much

Good evening, I received two DS-2CD2032-I from the China, each with firmware 5.2.0. One of the two is multilanguage while the other is only Chinese despite each are 5.2.0.

How can I make become multilanguage the 5.2.0 Chinese ?I knew you could not change the 5.2.0 in multilanguage

This is a screen of 2cd2032-1 Chinese with 5.2.0

I would like to bring the language to English or even Italian if possible. Now mount the firmware 5.1.6 Chinese. How should I proceed?

I install the European firmware 5.1.6 and later proceed with the hack? Where can I find the European firmware 5.1.6?

Good morning, I received a bullet Hikvision DS-2CD2032-I with the Chinese firmware. I would like to know if I can install the 5.1.2 European smoothly or if I should install a firmware Chinese. greetings