Jump to content

Szymon_Zy

Members
 View Profile  See their activity

  • Content Count

    76

  • Joined

  • Last visited

Posts posted by Szymon_Zy

  1. Posted

    After upgrade to new laptop with Creators Update my backup download folder switched to:

    C:\Users\Admin\AppData\Local\VirtualStore\Program Files (x86)\BACKUP

    My settings direct to:

    C:\Program Files (x86)\BACKUP

     

    Any fix for that? @MikeMahon do you know a solution?

     

    Edit: ok. just run ie as admin ad setup backup dir.

  4. Posted

    I installed it remotely via firefox (IE didn't allow me to - when i tried to upload .update it immedietly failed with error message pop up).

    Both outputs work ok.

     

    Did your update finished with "update successful, reboot device" or simmilar message?

     

    In case of any trouble try telnet recovery found somewhere in the begining of this thread. After power up you should get ping from 192.168.1.188 and few seconds later IP that you set up should also reply. If your usb ports seem to work try autoupdate from urccstvstore. Anyway my usb was dead (but thanks to Mike Mahon it works ok now) so i was forced to do telnet update using esata hdd with recovery files.

    BUT REMEMBER to plug Hdd after few minutes from power up! If you plug it while device is rebooting NVR will format the drive (at least that was in initial firmware).

     

    Connection to device works with telnet protocol. Login and password is also somewhere in this thread or you can find it easily via google.

  7. Posted

    i got into ssh ant runing ants_dvr makes segmentation fault .......

    dmesg go like that:

    Linux version 3.0.8 (root@sqy-desktop) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #82 Fri Oct 17 16:28:21 CST 2014
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: hi3520d
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 37632
free_area_init_node: node 0, pgdat c03cb448, node_mem_map c0419000
 Normal zone: 294 pages used for memmap
 Normal zone: 0 pages reserved
 Normal zone: 37338 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 37338
Kernel command line: mem=147M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs mtdparts=hi_sfc:320K(uboot),1536K(kernel),4M(rfs),25792K(app),768K(config),256K(logo)
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 147MB = 147MB total
Memory: 144904k/144904k available, 5624k reserved, 0K highmem
Virtual kernel memory layout:
   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
   fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
   DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
   vmalloc : 0xc9800000 - 0xfe000000   ( 840 MB)
   lowmem  : 0xc0000000 - 0xc9300000   ( 147 MB)
   modules : 0xbf000000 - 0xc0000000   (  16 MB)
     .init : 0xc0008000 - 0xc0023000   ( 108 kB)
     .text : 0xc0023000 - 0xc03b0000   (3636 kB)
     .data : 0xc03b0000 - 0xc03cbac0   ( 111 kB)
      .bss : 0xc03cbae4 - 0xc0418020   ( 306 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:128 nr_irqs:128 128
sched_clock: 32 bits at 82MHz, resolution 12ns, wraps every 52060ms
Console: colour dummy device 80x30
Calibrating delay loop... 1318.91 BogoMIPS (lpj=6594560)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 40) is a PL011 rev2
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 41) is a PL011 rev2
uart:2: ttyAMA2 at MMIO 0x200a0000 (irq = 42) is a PL011 rev2
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource timer1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
L2cache cache controller enabled
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) Š 2001-2006 Red Hat, Inc.
fuse init (API version 7.16)
msgmni has been set to 283
encryption fail
no ack
sha204_sn is 1
sha204_sn is 23
sha204_sn is 5a
sha204_sn is 85
sha204_sn is 92
sha204_sn is 7b
sha204_sn is 48
sha204_sn is bc
sha204_sn is ee
no ack
count is 255
no ack
no ack
no ack
no ack
no ack
count is 255
no ack
no ack
no ack
no ack
no ack
count is 255
no ack
no ack
no ack
no ack
no ack
count is 255
no ack
no ack
no ack
no ack
no ack
count is 255
no ack
no ack
no ack
no ack
no ack
count is 255
no ack
no ack
count is 15
no ack
sha204_devinfo  is 11 i is 0
g_sha204_delay_time is 20
sha204_sn is 1
sha204_sn is 23
sha204_sn is 5a
sha204_sn is 85
sha204_sn is 92
sha204_sn is 7b
sha204_sn is 48
sha204_sn is bc
sha204_sn is ee
sha204_devinfo  is 44 i is 0
sha204_devinfo  is 56 i is 1
sha204_devinfo  is 52 i is 2
sha204_devinfo  is 32 i is 3
sha204_devinfo  is 33 i is 4
sha204_devinfo  is 35 i is 5
sha204_devinfo  is 31 i is 6
sha204_devinfo  is 35 i is 7
sha204_devinfo  is 30 i is 8
sha204_devinfo  is 34 i is 9
sha204_devinfo  is 1 i is 10
sha204_devinfo  is 53 i is 11
sha204_devinfo  is 0 i is 12
sha204_devinfo  is 0 i is 13
sha204_devinfo  is 0 i is 14
sha204_devinfo  is 0 i is 15
TempKey  is e8
TempKey  is af
TempKey  is e8
TempKey  is 5b
TempKey  is d
TempKey  is 20
TempKey  is 6b
TempKey  is a8
TempKey  is 57
TempKey  is 5c
TempKey  is 38
TempKey  is 15
TempKey  is e2
TempKey  is 6d
TempKey  is ea
TempKey  is ea
TempKey  is 1e
TempKey  is 37
TempKey  is 84
TempKey  is a2
TempKey  is 6f
TempKey  is fc
TempKey  is 64
TempKey  is 8b
TempKey  is 23
TempKey  is 0
TempKey  is f6
TempKey  is 59
TempKey  is 98
TempKey  is ca
TempKey  is 47
TempKey  is aa
encryption ok
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs boh
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x100 irq 52
ata2: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x180 irq 52
Spi id table Version 1.22
Hisilicon Spi Flash Controller V350 Device Driver, Version 1.10
Spi(cs1) ID: 0x01 0x02 0x19 0x4D 0x01 0x80
SPI FLASH start_up_mode is 3 Bytes
Spi(cs1):
Block:64KB
Chip:32MB
Name:"S25FL256S"
spi size: 0x33554432
chip num: 1
6 cmdlinepart partitions found on MTD device hi_sfc
Creating 6 MTD partitions on "hi_sfc":
0x000000000000-0x000000050000 : "uboot"
0x000000050000-0x0000001d0000 : "kernel"
0x0000001d0000-0x0000005d0000 : "rfs"
0x0000005d0000-0x000001f00000 : "app"
0x000001f00000-0x000001fc0000 : "config"
0x000001fc0000-0x000002000000 : "logo"
Fixed MDIO Bus: probed
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: WDC WD7500BFCX-68N6GN0, 82.00A82, max UDMA/133
ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BFCX-6 82.0 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
himii: probed
Invalid HW-MAC Address: 00:00:00:00:00:00
Set Random MAC address: B6:58:0F:D2:EF:10
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 53, io mem 0x100b0000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
hiusb-ohci hiusb-ohci.0: irq 54, io mem 0x100a0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing init memory: 108K
udevd (492): /proc/492/oom_adj is deprecated, please use /proc/492/oom_score_adj instead.
Hisilicon Media Memory Zone Manager
hi3520D_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Hisilicon UMAP device driver interface: v3.00
load sys.ko ...OK!
Load tde.ko ...OK!
load venc.ko ...OK!
load group.ko ...OK!
load chnl.ko ...OK!
load h264e.ko ...OK!
load rc.ko ...OK!
load jpege.ko ...OK!
load viu.ko ...OK!
load vou.ko ....OK!
load vpss.ko ....OK!
load vda.ko ....OK!
load region.ko ....OK!
load vdec.ko ....OK
load vhd firmware.ko OK
load hdmi.ko ....OK!
Load hi_jpegdec.ko success.     (SDK_VERSION:[SDK_VERSION] Build Time:[Apr 15 2015, 20:12:57])
HISI_IRDA-MF @Hi3520Dv100R00
hiir: init ok. ver=Nov 26 2013, 15:14:13.
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
rtusb init rt2870 --->
usbcore: registered new interface driver rt2870
PPP generic driver version 2.4.2
PHY: himii:03 - Link is Up - 100/Full
JFFS2 warning: (497) jffs2_do_read_inode_internal: Truncating ino #261 to 1580542 bytes failed because it only had 679936 bytes to start with!
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
[GPIO] GPIOGET_WATCHDOG Enable chardata = 1!!!
***link down status changed***.
PHY: himii:03 - Link is Down
PHY: himii:03 - Link is Up - 100/Full
#

     

    running ants_dvr:

    # ants_dvr
begin dvr//////////////////////////////////////////////////////////////
argc 1, argv ants_dvr
g_iDevType 153
open /usr/etc/mycfg.xml

open /root/res_xml/Keyboard.xml

DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ350]       QLinuxFbScreen::connect :0
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ379]
open /dev/fb0

DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ397]       open device /dev/fb0 success
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ425]
open /usr/etc/mycfg.xml

open /root/DeviceDisplay.xml

DBG[embedded/qscreenlinuxfb_qws.cpp getScreenInfoĄĄ307] file doesn't exists
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ469]       vinfo.xres 1024 768
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ481]       d_ptr->fd 8 vinfo xres 1024, xres_virtual1024
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ513]       screen vinfo
bits_per_pixel 16
r g b 5 5 5
d = 15
finfo.line_length 2048
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ554]       dw is 1024,dh is 768 lstep 2048
DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ600]

 mmap fb0 : d_ptr->fd 8,  data 1089155072, mapsize 4300800

open /usr/etc/mycfg.xml

open /root/res/language_English.qm

open /root/res/LanguageInfo.xml

open /root/res/default.qss

erro[antsMainDlg.cpp signalHandlerĄĄ1279]       signo 11
open /usr/etc/myExceptionState.xml

open /usr/etc/myExceptionState.xml

open /usr/etc/myExceptionInfo.data

################################ stack dump
iStack [becb79b4] = 40e25998 object:/lib/libc.so.0 0x40e19000 symbol:__default_sa_restorer [0x40e25998+0x0]
iStack [becb79b8] = 5ac3c35a object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x5ac3c35a]
iStack [becb79bc] = 182a630 object:ants_dvr 0x8000 symbol: [0x0+0x182a630]
iStack [becb79c0] = 40ead0a8 object:/lib/libc.so.0 0x40e19000 symbol:__malloc_lock [0x40ead0a8+0x0]
iStack [becb79c4] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf]
iStack [becb79c8] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf]
iStack [becb79cc] = e
iStack [becb79d0] = 17
iStack [becb79d4] = 0
iStack [becb79d8] = becb8704 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8704]
iStack [becb79dc] = 7198
iStack [becb79e0] = e9975c object:ants_dvr 0x8000 symbol: [0x0+0xe9975c]
iStack [becb79e4] = e925c4 object:ants_dvr 0x8000 symbol: [0x0+0xe925c4]
iStack [becb79e8] = 0
iStack [becb79ec] = 182b950 object:ants_dvr 0x8000 symbol: [0x0+0x182b950]
iStack [becb79f0] = ffff0fc0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xffff0fc0]
iStack [becb79f4] = becb870c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb870c]
iStack [becb79f8] = becb86b0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb86b0]
iStack [becb79fc] = becb8770 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8770]
iStack [becb7a00] = becb7ccc object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7ccc]
iStack [becb7a04] = becb8710 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8710]
iStack [becb7a08] = e8fa48 object:ants_dvr 0x8000 symbol: [0x0+0xe8fa48]
iStack [becb7a0c] = becb7ca8 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7ca8]
iStack [becb7a10] = 1e148 object:ants_dvr 0x8000 symbol: [0x0+0x1e148]
iStack [becb7a14] = 2049a0 object:ants_dvr 0x8000 symbol: [0x0+0x2049a0]
iStack [becb7a18] = 20000010 object:ants_dvr 0x8000 symbol: [0x0+0x20000010]
iStack [becb7a1c] = d0
iStack [becb7a20] = 0
iStack [becb7a24] = 0
iStack [becb7a28] = becb7a78 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7a78]
............
iStack [becb7ca0] = ffff0fc0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xffff0fc0]
iStack [becb7ca4] = becb870c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb870c]
iStack [becb7ca8] = becb8704 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8704]
iStack [becb7cac] = 1e148 object:ants_dvr 0x8000 symbol: [0x0+0x1e148]
iStack [becb7cb0] = becb8774 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8774]
iStack [becb7cb4] = 40054000 object:/lib/libgcc_s.so.1 0x4003e000 symbol: [0x0+0x40054000]
iStack [becb7cb8] = 40ead0a8 object:/lib/libc.so.0 0x40e19000 symbol:__malloc_lock [0x40ead0a8+0x0]
iStack [becb7cbc] = becb85a4 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb85a4]
iStack [becb7cc0] = becb876c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb876c]
iStack [becb7cc4] = becb8728 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8728]
iStack [becb7cc8] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf]
iStack [becb7ccc] = 182b850 object:ants_dvr 0x8000 symbol: [0x0+0x182b850]
iStack [becb7cd0] = 6f6f722f object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6f6f722f]
iStack [becb7cd4] = 65722f74 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x65722f74]
iStack [becb7cd8] = 614c2f73 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x614c2f73]
iStack [becb7cdc] = 6175676e object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6175676e]
iStack [becb7ce0] = 6e496567 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6e496567]
iStack [becb7ce4] = 782e6f66 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x782e6f66]
iStack [becb7ce8] = 6c6d
iStack [becb7cec] = 0
iStack [becb7cf0] = 0
signo 11=SIGSEGV :Segmentation fault
########################### 2016-08-20_12:56:39


Segmentation fault

  9. Posted

    Hi

     

    I am currently exploring the remote access side of it as I intend for it to run in my attic. the software is very touchy about IE, my main pc shows the login screen but my laptop shows a chinese page. I have set the active x settings like for like and have downgraded to IE9.

     

    An annoying aspect is that when remote accessing when you log off all the setup is lost, not the cams but the screen setup - i.e a 4 grid view.

     

    Hi,

     

    Thanks for sharing Your opinion.

    You can also try Crome web browser with IE tab add-on installed (it supoorts ActiveX). I have some analog DAHUA DVR which also needs IE and activeX but it works perfectly with chrome IE tab

    I'm not sure but Firefox may also have some plugin to work with IE activeX.

     

    Before buying I asked the seller for manual to the mini NVR and it was mentioned there that this unit was tested with following HDD:

     

    "The product supports external HDD only, including mobile HDD, hard-disk cartridge with E-SATA port.

    We have tested following HDD brands and model numbers work with the mini NVR:

    Seagate Backup Plus 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBU1000300

    Seagate Expansion 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBX1000301

    Seagate Expansion 2TB 3.5’’ USB3.0 external HDD, Model No.: STBV2000300

    Western Digital (WD) Elements 1TB 2.5’’ USB3.0 mobile HDD, Model No.: WDBUZG0010BBK"

     

    I have got 2,5' SATA HDD which I am planning to connect via following cable:

    243513_1.jpg

     

    I think it is also possible to connect 3,5 SATA HDD with external power supply 12V. USB port is 5V only which is ok with 2,5 HDD.

     

    What is the firmware version of Your unit?

    Maybe firmware/software is being developed and in latest version it automatically discover cameras.

     

    My NVR has been shipped and I am awaiting it in about 20 days. In the meantime I am still thinking which IP cam to buy...

     

    I am curious to know if you got the 3.5" Hard drive to operate with the cable you mentioned. I would like to use a 3.5" 2TB drive as they are half the price of the 2.5" hard drives. I have a Hitachi 2TB, 7200RPM, SATA 6.0Gb/s. It says 5V 450mA 12V 850mA on it.

     

    You don't have to be curious anymore, it won't work since there ara no 12V inside this cable. Also Esata cable without external power plug won't work since this device does not include power pins in esata connector.

  10. Posted

    Open File tab - change dates to long time ago and today. Press search and check does under certain dates of backup files are found.

     

    I know this device have terrible UX but Mike Mahon here does not care about it, this is chinesse way of making software. They don't care about user experience, user guide, flexiblity - it looks like the software was build for its dev not und users.

  11. Posted

    I'm trying to find a comfortable method of exporting captured video from the NVR to a PC, i.e. without swapping drives or attaching a 2nd drive or usb storage device to the NVR. By creating a symlink in /root/web/www to /tmp/usb/sda1, I can download the files using a browser. But I still have to export the video using the ants gui over HDMI, and know the exact filename and wget it. There must be an easier way? Preferable something that can be automated with scripts. Specifying channel, start and end-time, run the export on the NVR, wget (or netcat) the file to PC and remove the original from the NVR. Can't find it in the webinterface but the goolink app does allow to export videos so there must be a way to imitate it with a script. Any ideas?

     

    If you will find a way how to do it, please share it here, I was looking around this too but was unable to come up with anything...

     

    By the way the filename is easily reconstructable, it's just channel name and start and end times of the video, which you set when exporting it.

     

    Why are you doing it in so complicated way?

     

    Open config (Under IE start/run command: iexplore 192.168.1.23 - put your ip) in ActiveX mode. Scroll to System Management/Local Settings. Chose one single local dir for all directories (Preview, Playback, Backup, File, Preview Record). Save settings.

     

    Return to Playback and use backup button. Enter start&end time and change output to AVI. Press start and VOILA. Look into dir you have chosen before. There should be a subdirectory backup - and directory structure will show you data, time, channel and at the end avi file with recorded movie.

     

    IT WORKS ONLY UNDER INTERNET EXPLODER!

  14. Posted

    you have to open 5051-5052-5053

    then you see image in remote with IE and active-x installed

    with other browser i see cam only in localhost

    I switch back to the default port but no luck. Furthermore, impossible to register the active X which is not signed. It is a real mess!

     

    you have to change options of IE for trusted sites, adding the adress of the nvr and enable the installation of not signed active-x

     

    otherwise you can download manually the active-x with a downloader and install it manually

     

    then, if you opened the door 5051-5052-5053 it will work

    trust me, i had the same problems and i solved like this

     

    in case you need --> http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/how-do-i-add-a-site-to-my-trusted-sites-list/98cc77c8-b364-e011-8dfc-68b599b31bf5?auth=1

     

    Windows 10 does not allow any active-x. MS Edge does not support it. So ... if you want to use remote access there is no way. But you can try forwarding also 1935 for flash realtime. It may help, if it does not .... sorry no more remote view on this device

     

    Come on Mike Mahon ask someone responsible for writting firmware what ports are really used to view viedo in flash mode. We all here know that you are not telling as whole truth. Forwarding 80, 5050-5053, 1935 is not enough. No way to see video remotely while in lan it works.

  16. Posted

    I think that there is one problem.

     

    Most of us use this device as NVR, and connect ONLY through webbrowser while the web interface is cut down from some options. First configuration should be made using hdmi/dsub connection.

     

    This is very disappointing, becouse hdmi connection should be only secondary and main connection should be made via webbrowser. IMHO that is vendor missunderstunding on customers requirements.

     

    Like i said many times there is no one in company who cares about User Experience - device is not bad but GUI is fatal and should be redesigned from scratch.

  19. Posted

    try to format it on your pc and delete any paritions and try again also try another usb cable

     

    Shoud I format it as FAT32, EXT3, NTFS?? Still just wondering why it formats my hdd if it was already formatted.

     

    IMHO - just clear it up. Remove all paritions. But hdd works randomly. This is bug in NVR firmware. And you just have to try on your own to find proper method to make it work. Basicly use E-Sata cable with external power usb supply.

  23. Posted

    Did you fix hdd detection problems after reboot or few days/weeks work?

     

    Is it a common problem? I never heard about this problem before.

     

    Dig through this thread a lot of people have problem with hdd seen by nvr, or the drive disappear after restart.

  25. Posted

    My mini nvr got weird today. It does not see my hdd again. I rebooted it remotely but it does not help. I thing that there is something bad with hdd detection becouse there is nothing about esata hdd in dmesg.

     

    Does mini NVR II have this problem solved? I don't want to spend cash on new device with the same bugs.

×