-
Content Count
22 -
Joined
-
Last visited
Posts posted by ye5022
-
-
Ask the guy for a English firmware!
-
I have used this DVR before. Its password depand on its date.For example: If the date shows 2015-05-12 16:21:54 on the DVR screen. Then its super password is 051216 .
Maybe you can try this.
Hi there going on this if the screen time i have on my screen is
29-05-2015 11:41:42
what would the password be then.
Thanks in advance.
Then password would be 052911.
Today is 02-06-2015 11:41:42 and the password at 11 o`clock is 060211
The password aways change while time is going .
-
Hi Guys,I'm new at setting up a surveillance camera but I understand how it works. Anyway guys what will you suggest with my project? this is my first time to setup this type of place, it's industrial area. I have a plan putting bullet cameras and 1 PTZ, but my problem is running the cables because they require UPS since they're using two generators and switching every 12 hours. Do you think it will work if I use Siamese cable from camera to dvr and power box?
Thanks in advance and looking forward to know you guys
I suggest yu can use POE Solution, Not hard to install.
-
Hi,just received two update files for I21H and I21M from Apexis. They work fine.
Please send a PN if you need them.
Can you send the I21H and I21M update file to me? my email is jason@fuhin.com
Thanks.
-
SPECS of NVR....Model N6200-8E
Master Version V4.0(20140417)
Hardware Version V4.0
I am looking for the latest WORKING firmware for my NVR. Is there a list anywhere?
Thanks
Bill
I have a new firmware in 201501. Do you need it? jason@fuhin.net
-
I have used this DVR before. Its password depand on its date.
For example: If the date shows 2015-05-12 16:21:54 on the DVR screen. Then its super password is 051216 .
Maybe you can try this.
-
If your camera is small one, for example, its IR LED is less than 36pcs. HDD is 2TB.
Then a 48V 2A power Supply is enough for them. Connect cameras to a POE NVR.
-
For now, if a camera can support "onvif notify" and NVR support onvif notify. then they can work togeter when motion.
But lots of chinese camera just support onvif for video output, they don`t support onvif ontify. so they can not connect other band NVR and motion.
I know HK and DH have their private motion alarm protocol , and they support onvif notify, too.
I have test it one week ago.
-
In my memory, no NVR can pre record when motion. All NVR can record just from motion and continue.
Because NVR didn`t re-encode when receive a data from IPC.
DVR can do pre record, because DVR need encode the data to record.
Hi - need an advice
in IP/Megapixel Cameras and Software Solutions
Posted
Hi, the one you bought is not real POE, maybe that only DC12V and transfer from NVR to IPC, without any manager or protocol.
Standard POE is DC48V , IEEE802.3af protocol. This standard POE can support max 100m.