Jump to content

rashedi_a

Members
 View Profile  See their activity

  • Content Count

    2

  • Joined

  • Last visited

Posts posted by rashedi_a

  1. Posted

    update:

     

    Firmware update seems to be the root of my problem, I cannot get the card to firmware correctly update.

     

    The GV card has a 3 pin jumper with the following config - PIN 1-2 (NORM) PIN 2-3 (UPDATE).

     

    so the card was set to NORM and firmware wouldn't update properly - I didn't know there was a jumper for firmware at this point (and the "gvfpaup.exe" said "Update succeed").

     

    so then I put the pin to UPDATE and performed the update, all good, but when returning the pin to NORM after doing the update - the firmware goes back to 1.42.00 ??????

     

    Leaving the jumper on UPDATE keeps reporting 1.55.00, but I still have counterfeit errors in GV ??!?!?!

     

    ARGH

     

    I am having the SAME problem as you are. I tried everything, the card got sent back to geovision and they told me it couldnt be fixed, they claim it had a bad chip and they dont have any more chips. go figure... i say B.S.! so I keep messing around with the card and install orginal 8.2 version for the gv-1480 card. had some problems with cant find keypro nonsense, then I reinstalled the drivers to a newer driver from version 8.5 but still kept the version 8.2 software. hey guess what! the card works! no more counterfeit message after 1hr of run time! i havent tried the latest software 8.5.3 yet. i sure it will be the same crap. I tried 8.4 and i am getting the counterfeit message also. now the problem comes in with, I have 8.2 in order to run the card however I want to buy some newer ip cameras and 8.2 doesnt support them! so bottom line is that they have a software issue that they cant fix! im trying to relay this message over to geovision but all i get is a dead end and dead end! support on this product sucks! all the tech guys know how to do is blame it on your pc, or windows, or mother nature! or whatever else that they can come up with!

     

    Hi,

    can you give me a link for download the software?

  2. Posted

    update:

     

    Firmware update seems to be the root of my problem, I cannot get the card to firmware correctly update.

     

    The GV card has a 3 pin jumper with the following config - PIN 1-2 (NORM) PIN 2-3 (UPDATE).

     

    so the card was set to NORM and firmware wouldn't update properly - I didn't know there was a jumper for firmware at this point (and the "gvfpaup.exe" said "Update succeed").

     

    so then I put the pin to UPDATE and performed the update, all good, but when returning the pin to NORM after doing the update - the firmware goes back to 1.42.00 ??????

     

    Leaving the jumper on UPDATE keeps reporting 1.55.00, but I still have counterfeit errors in GV ??!?!?!

     

    ARGH

     

    I am having the SAME problem as you are. I tried everything, the card got sent back to geovision and they told me it couldnt be fixed, they claim it had a bad chip and they dont have any more chips. go figure... i say B.S.! so I keep messing around with the card and install orginal 8.2 version for the gv-1480 card. had some problems with cant find keypro nonsense, then I reinstalled the drivers to a newer driver from version 8.5 but still kept the version 8.2 software. hey guess what! the card works! no more counterfeit message after 1hr of run time! i havent tried the latest software 8.5.3 yet. i sure it will be the same crap. I tried 8.4 and i am getting the counterfeit message also. now the problem comes in with, I have 8.2 in order to run the card however I want to buy some newer ip cameras and 8.2 doesnt support them! so bottom line is that they have a software issue that they cant fix! im trying to relay this message over to geovision but all i get is a dead end and dead end! support on this product sucks! all the tech guys know how to do is blame it on your pc, or windows, or mother nature! or whatever else that they can come up with!

×