Raising_Eyebrows

Eyebrows, is that table showing the port forwarding on the router or the port information as it is configured on the device? If it is the latter then it is unnecessary. And if you are port forwarding is the nvr on a remote network?

 

Post up or PM configs of ivms, I have used both client and PCNVR (as well as the standalone NVR software) successfully to record. I'm currently using the client software as a single PC solution for recording and live viewing.

Hi Antitrust, thanks for responding. I'm trying to get the PCNVR software to record on my Windows Home Server 2011; server, cams, and iVMS-4200 on Windows 7 client are all on my LAN (192.168.1.x). The table shows the device settings. Here's a capture of the front door camera settings for example.

Here are the port forwarding settings on the router...

The first three lines are required for remote access to my Windows Home Server. The last three lines are required in order to access the camera feeds remotely via iVMS-4500 on my phone. I can view the camera feeds just fine. I just can't figure out how to get them to record to Windows Home Server. Thanks.

Did you guys ever get the PCNVR server software working on Windows Home Server 2011? I've tried both v1.3 and v2 with no luck. I'm using the following ports and have port forwarding for all in my router, iVMS4500 and iVMS4200 display feeds just fine both in network and remotely. But I'm flummoxed regarding recording the feeds.

Using a dedicated 2TB drive (S:) for recording storage on WHS2011. iVMS4200 v2 on local Windows 7 client. Cameras are DS-2CD2032-I firmware v5.2.0 build 140721.

Thanks,

RE