mirko
-
Content Count
11 -
Joined
-
Last visited
Posts posted by mirko
-
-
should it support i12 without setting anything on the camera?correct.
I can't provide access to the camera, I have it on my internal network and just testing it, so it's not on all the time.
Maybe teamviewer?
-
Ok, I'm taking back what I said, the motion detection works but after some time it stops working. After I restart the NVR, it works again. The camera is detecting motion all the time (I see it in the camera log) so it's clearly the problem with NVR.The software in the NVR is piece of ****. The email now also worked for 1 event, then it does not work again, it's acting absolutely unpredictable.
are you using TCP or UDP for communication between camera and nvr?
can you provide an access to camera? it's strange if i12 doesnt work...
-
camera is connected via onvif or i12 protocol?
did you tick record channel number?
camera is connected via onvif
yes, I have ticked the record channel. As I said, the main problem is that the motion detection mask disappears the next time I go to the motion detection settings even though I save it.
solution #1)
try connect camer via i12 protocol
solution #2)
set motion detection area on camera (not using mini nvr)
-
hi im a new in this forum, i already bought escam nvr k108, the problem is motion detection fitur. i login to be administrator and i try to set sensitivity high and drag the zone, the problem is if i confirm the save that parameter, i check again, always back the drag zone is gone and the sensitivity is low, i dont know why. so the motion detection cant workanybody can help me about this problem?
thanks before
warm regard
I have the same problem and I just wanted to post the same question
I have this camera: http://www.aliexpress.com/item/Full-HD-POE-Module-Inside-IP-Camera-Outdoor-Waterproof-1080P-2MP-Bullet-IP-Camera-6mm-Lens/32374876634.html
Motion detection works on the camera itself, but on the NVR it doesn't work exactly as yoengkiong explained. I set the zone, save, and when I go back, the zone is gone. I have the firmware 20150808.
Is there any chance to get it working?
Thanks.
camera is connected via onvif or i12 protocol?
did you tick record channel number?
-
Hi,
can someone suggest CMS that work with mini nvr?
thanks
-
wow is this a mikrotik tool?
yes
-
N6200-4E won't record video or take snapshtos from this piece of chinahttp://www.ebay.com/itm/271770949404?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
error messages vary from silence (motion detection mode) to "this channel does not support capture" and "file exists or other caused error".
the camera is set to detect motion over whole image it gets, sensitivity max. nvr is the same.
my guess is that the camera does not match onvif standard.
could there be better guesses?
for checking onvif compatibility use onvif device manager http://sourceforge.net/projects/onvifdm/
ps
be aware... If you disable cloud option, the mini nvr still trying to reach the server.
-
Thanks mirko ,Does that camera (Item specifics show that to be branded as an Anran C130D1) work with motion detection ?
Cheers
Dave
motion detection works well
you only need to "install" i12 protocol
-
Thanks for replying Minglarn, I'll pick one of those Hikvisions up to try with it.Anyone else have any other camera recommendations?
I use cheap chinese cameras with my 8ch mini nvr, and works pretty well...
only problem was restarting mini nvr from unknown reason... for example
... 2 2015-04-06 14:23:36 Exception Video Lost 1 3 2015-04-06 14:23:36 Operation Power On 1 4 2015-04-06 14:23:36 Operation Abnormal Shutdown 1 5 2015-04-06 14:23:36 Operation Remote Login 1 127.0.0.1 6 2015-04-06 14:22:47 Alarm Motion Detection Begin 2 7 2015-04-06 14:22:42 Alarm Motion Detection End 2 8 2015-04-06 14:21:56 Alarm Motion Detection Begin 2 9 2015-04-06 14:21:46 Alarm Motion Detection End 2 10 2015-04-06 14:21:34 Alarm Motion Detection Begin 2 11 2015-04-06 14:21:21 Alarm Motion Detection End 2 ...
"
Maybe it's problem in power supply? I use external hdd connected to NVRs usb port.
-
The management host 1 and 2 ?
Can someone confirm this ? By the way i was curious what is this
Trust me, you want to turn off
If you don't need to remote access, block all non-local network traffic...
Mini nvr questions
in Digital Video Recorders
Posted
first of all, use compatibility view in IE.
and I think that the best firmware is V4.0[20150808]