lukiszyszka

I confirm that above. I have the same firmware version in last received camera.

I don't see Dahua reseller in my and border's country. I see local company, which is rebranding it and sell it 4x expensive... It is not normal situation.

Sorry, but as an European I don't understand this sort of thinking. First: Support in Dahua NOT EXIST. You are not answering for emails, any help for your devices. Is this "protection"?. Second: Sellers in China very often are cheating buyers. As me few days ago, when I received NVR with Chinese menu. I asked about English. "Yes, of course, English menu". When package arrived I saw Chinese hashes on the display. I asked about this. "Yes, PSS software is on the cd". And now company which wants to be the best and take care of consumers, should give me a hand. I don't want help for free. If you are hesitate about your firmwares, you can send an email with instructions how configure device to connect it from the Internet and remotely upload a firmware after payment, I think about 10, 15 USD. Or generate firmware with a key connected with serial number, and send it to customer. Everybody will be happy. I am buying Dahua devices about from one year. I have few problems with devices. Nobody from you helped me. I don't want miracles. I would like to get some help for a money.

Hi, I have a problem in one localisation. There are 10 cameras outside. As NVR is Dahua 4116H device. 8 cameras are connected by POE switch, 2 cameras has own power supply and they are directly plugged into switch. 2 cameras, POE switch and NVR are connected to 1 Gb Asus branded switch. From the first days in cameras are these lines in log: 5 admin 2015-04-05 18:40:35 Logout {"Address":"192.168.1.109"} 6 admin 2015-04-05 18:40:18 Login {"Address":"192.168.1.109"} 7 admin 2015-04-05 18:40:07 Logout {"Address":"192.168.1.109"} 8 admin 2015-04-05 18:39:51 Login {"Address":"192.168.1.109"} 9 admin 2015-04-05 18:23:59 Logout {"Address":"192.168.1.109"} 10 admin 2015-04-05 18:23:43 Login {"Address":"192.168.1.109"} 11 admin 2015-04-05 18:17:12 Logout {"Address":"192.168.1.109"} 12 admin 2015-04-05 18:16:56 Login {"Address":"192.168.1.109"} 13 admin 2015-04-05 18:14:53 Logout {"Address":"192.168.1.109"} 14 admin 2015-04-05 18:14:32 Login {"Address":"192.168.1.109"} 15 admin 2015-04-05 18:13:36 Logout {"Address":"192.168.1.109"} 16 admin 2015-04-05 18:13:20 Login {"Address":"192.168.1.109"} 17 admin 2015-04-05 18:07:29 Logout {"Address":"192.168.1.109"} 18 admin 2015-04-05 18:07:09 Login {"Address":"192.168.1.109"} 19 admin 2015-04-05 18:06:13 Logout {"Address":"192.168.1.109"} 20 admin 2015-04-05 18:05:53 Login {"Address":"192.168.1.109"} 21 admin 2015-04-05 18:02:45 Logout {"Address":"192.168.1.109"} 22 admin 2015-04-05 18:02:22 Login {"Address":"192.168.1.109"} 23 admin 2015-04-05 18:01:56 Logout {"Address":"192.168.1.109"} 24 admin 2015-04-05 18:01:39 Login {"Address":"192.168.1.109"} 25 admin 2015-04-05 18:01:09 Logout {"Address":"192.168.1.109"} 26 admin 2015-04-05 18:00:56 Login {"Address":"192.168.1.109"} 27 admin 2015-04-05 18:00:56 Logout {"Address":"192.168.1.109"} It seems that a NVR (192.168.1.109) is still login and logout from each of camera. After few days working each of camera is hanged and must be disconnected. After powering again a NVR is connecting to the camera and all is working fine by next few days. From a NVR log: 8 Time: 2015-04-03 09:19:46 Type: Remote Info Contents: Channel: 5 IP Address:192.168.1.112 Type:Offline 9 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 6 IP Address:192.168.1.118 Type:Offline 10 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 2 IP Address:192.168.1.113 Type:Offline 11 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 9 IP Address:192.168.1.114 Type:Offline 12 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 4 IP Address:192.168.1.111 Type:Offline 13 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 3 IP Address:192.168.1.116 Type:Offline 14 Time: 2015-04-03 09:20:06 Type: Remote Info Contents: Channel: 1 What I done?. - changed an admin password to default "admin" - changed Motion detection (which works very good) to Continous recording - checked wires to cameras - changed POE switch - changed one 8 POE ports switch to 2x 4POE ports switch - removed Internet from this network - checked DHCP settings and range in TP Link router - replaced switch in this network to Asus 1 Gb 5 ports. When camera is hanged up, I can't login by WWW, sometimes I can login by Telnet. I have few this NVR 4116H in other localisations and there is no problem. What I will do: - I will replace power supply to a NVR - I will try to replace an NVR to other one - I will connect an UPS device On Dahua's site I have found: A NVR is an English menu. Cameras?. Probably too, but I don't know. But are with an English language. But the same cameras are working correctly in other places from September, 2014.

Try by ConfigTool:3800

Thank You cctv_07!!!!!

Thank You for it!!!!!!!

Dahua's MAC addresses start: 4C11BF 9002A9 and only those two. Any other.

Did you do some print screen or note software version from Info page, when camera was working. Before any upgrades?.

Today arrived to me Dahua 4300S-V2 with an English menu IPC HFW4300S V2 SW: 2.210.000.12.R build 2014-02-25 Web 3.2.1.170795 I tried to update it to 2014-04-19 and camera is rebooting and web interface is not available. Dahua is a piece of **** I see... I tried to do update, because in original software were not few settings, which was interesting for me... Is there any possibility to download all flash memory from camera before update, to have possibility upload it by TFTP again?. I have few working cameras with this software.

iTuneDVR is honest Man. You can trust him . Regards, Lukasz@Poland

I searched in my mind and: http://wrightwoodsurveillance.com/forum/thread-89.html for NTSC and ftp://ftp.wintel.fi/drivers/dahua/cam-fw/IPC-HX5%284%29XXX/V2.420.0005.0_20141205/ for PAL

Now I don't remember where I found this. I checked it on my cameras and it was working. Both PAL and NTSC versions. If you need some of this please give me an email address by private message. I will send it to you.

I didn't see Dec 05 2014 in NTSC version. I saw Sep 30 2014 in NTSC version only, but not PAL .

Hi, all Dahua's 4300s are described as IPC-HFW4300S-V2 on the labels. I compared mainboards of "good" device and this one. All is the same, printed letters are the same, etc. It was only software trouble. Probably I tried to upload higher version than it was. Maybe if I try lower version than was, all would be ok. Now I can not test it . This version of firmware I saw on same movie on YouTube in English, NTSC version when some guy was tested this camera. But I could not find this version...

Yes, I recall it... Thanks. Yes, there is as I supposed. Now I am searching this firmware which was originally in camera. It was Chinese Pal version from 21.06.2014. Maybe I will find it and it can change something. I will try to connect this camera to Dahua's NVR with POE. After connecting this, POE switch is changing all settings and take control on the camera. If it will work in this configuration it will be ok for me. I don't need web interface...

I connected to camera by Telnet and I see something strange. inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 Broadcast is changed to 192.168.1.255. Question: How I can change it in camera? It was set to 192.168.1.1 before "force" upgrading. On other Dahua's 4300s this firmware from 2014-12-05 was upgraded successfully. Edit: I checked it on other, working camera and Bcast is the same as this...

Thanks, but now all works without web access... From telnet I can login to camera, see files, memory, etc. Device is responding for ping. Typing an ip address in Mozilla and IE is ending with "page can not be find".

Hi, It was helped me. I logged in from ConfigTool 1.0.5 by typing 3800 port, then login by default password and login. Then upgrade was successfully ended, device reboted, it sounds "click" twice. Now camera is responding from IP address, I can login by telnet. But WEB UI in browser is not answering

Hi, Thank You. I just checked and tried to change 37777 to 3800. By Config Tool I can not do this. In camera I see message that "port is occupied, save failed". Of course in Chinese... I checked in Windows "netstat -an" and there is no 3800 port....

Hello Guys, Today I received ordered Dahua IPC-HFW4300S-V2 camera. Camera as usuall. But after start I saw Dahua's logo and Chinese letters. Login as usuall: admin/admin. Inside all in Chinese. Firmware is: IPC-HFW4300S-V2 2.420.0002.0.R build 2014-06-21 WEB: 3.2.4.184667 ONVIF: 2.4.1 I tried to upload firmware from 2014-04-19 and latest from 2014-12-05 by Dahua Config Tool and firmware is uploading and after few seconds there is a message that Updating was not successfully or similar. It seems as blocked firmware inside. I connected to the camera by Telnet and there is normal "inside": BusyBox and files tree same as other 4300s's. Do You have any idea how to replace this firmware to an English version?. Regards, Lukasz