-
Content Count
362 -
Joined
-
Last visited
Posts posted by sinbad
-
-
thanks guys for the replies.
@cctv_down_under I assume you talking about using the lens filter if i go the IR housing way correct?
did you had any past experience with these devices? are they reliable and perform OK if i don't have the means for another IR device?
thanks again.
-
casino sounds like a fun account. sign me up 2.
-
Hi all,
I need to use a standard box cam but wish to have an IR for night vision.
extreme cctv products are too pricey for the client and a bullet with IR built in will not do this time.
(BTW does the bullet camera pass NEC inspection without proper tubing when installed outdoor?! I usually use standard box housing with liquid-tight and not sure if exposed wire passes or not... )
So I was looking at using an enclosure with LEDs on it, like [edit by mod - store link removed] , but was wondering if I need to run extra wire for powering the LEDs? and how good are they?
also after some quality time with google I see few IR lenses like [edit by mod - store link removed] but really not sure which way to go....
can you guys please shade some light (IR ) on me?
thanks in advance for any input.
-
also try to click your keyboard 'windows' button (if you have one) to open the start menu.
-
good day,
searching on the forums here and on NVT site i'm wondering more and more if there is a reason why not to use UTP cable with balun instead of coax?
also, do i need just 2 wires per camera? can a single cat5 cable transmit 4 cameras video?
thanks!
-
anyone have a break down of all the servers GV have listed in "network port information" ?
will really want to know what they have to offer
if you know of any please post.
WebCam - I know
CenterV2- I know
Control Center server - ??
Remote PLayback server- ??
TCP server - ??
Multicast server -??
Twin server- ??
UpnP -??
Wiegand capture server-??
-
thanks bike_rider.
-
Ah, I found it. page 318 of the manual describes who to send email on alert conditions.hmmm... my manual is 314 pages
u have a link maybe for u'r version?
-
thanks a lot for the replies people.
really appreciated.
@Rooney awesome link. thanks.
-
Hi all,
sure it was asked before; sorry but cant find it.
any 24VAC bullet out there?
thanks in advance.
-
Thanks a lot 501.
2nd time you hit me
if you were here I would let you a spin on my ptz
-
out of curiosity, mind if i ask why not H.264 compression?
u can find a good powerful freeware for partitioning here:
make sure you read all the documents before you start. also, since you already using the drive you should know that splitting it now to *might* cause you problems so make a backup just in case.
-
is this a legit card?
-
too bad. what a nice picture it has.
-
It's normal that windows only shows you *most* of your drive as available space.
FYI very not healty for your windows drive to run low on space. get Acronis and play with partitions. it's always a good idea is to set separate partition for the GV recordings( you can leave the proggy installed in the path but to store the video elsewhere.)
I think that your recording time is too low for 400 GB that you do have. should be way more than 3 days no?
what res you have set? what compression? what card?
-
Hi all,
anyway I can set cameras 1,2,3 to record in (240x320) and only camera 4 (640x480)
Configure>Video Source only let me set it globally.
any ideas?
[GV800 V.8.01
-
sounds to me like an issue with your dual monitor app rather than GV.
try UltraMon i use it for 2 monitors w/out problems/
-
yes we see that already.
damn what a waste of $$$ on this cams.
btw what was the distance in your job?
-
I have Motorola A1000, Symbian OS, SSView and T-mobile connection.
works sweet but my partners Cingular connection is much much better here in Miami.
if you want to control PTZ better get a 'listed as tested' device from the GV list.
-
sorry can't post link to info. I'll sure update links in couple days:
I got 4 of INOX IX5600 dual CCD for a job to try them. distance between server to cams is ~400 ft. wired over Siamese 22AWG w/95% braid, 2X18AWG power.
first it worked fine, then it started having black round corners on all the cameras, it looks just as if the shield is blocking the lens view.
So i searched to see if i can find some info and found this page:
bluecherry [DOT] net/support/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=2
pretty much it says that the cam is known to have problems with long distance wires. but I don't know how reliable that site is.
I'll have to change them to box cameras and see if it's the same.
Can someone share if they had any problems in situations like this?
is this a know issue?
-
bike rider this is very cool. u made my day.
any way you know how to make center V2 send images ?
thanks again!
-
can someone confirm that he's able to receive images from GV-800 via email alert?
-
My Motorola A1000 is working fine with symbian+SSview, but I can't control the PTZ yet.
GV have on their site a list of tested devices. mine isn't there but works.
-
Hi guys,
new around here; please be nice
can someone please help me with instructions on how to configure GV800 to send me email alerts with images?
I have an smtp account working and test email works fine.
I see "Email Setup" in multicast and get the test email from there but I don't see where/what triggers the alert to be sent. I have the cam set on motion-detect but no email is sent when something happened.
can someone clarfiy for me what's this setting page is for exactly?
I'm able to recieve alerts from CenterV2 but that include only what I put in the text box and not include a log message or a jpg.
anyway to get snapshots in email via CenterV2?
IR Housing ?
in Security Cameras
Posted
was also considering using an IR dome instead, not sure if they'll do the job i need there; however the question i have is that i don't see any brand name that makes dome with LEDs, only china crap; and was wondering if this is really the case or if i just don't know where to search? and if someone knows the reason why it's not popular with brand names to see them with IR.