JBGUYOT
-
Content Count
17 -
Joined
-
Last visited
Posts posted by JBGUYOT
-
-
Hello Patmas,
first, do you try recovery file for your problem?
Do you have files of release 20150808 for N6200-8E ? I would like them.....thanks
-
For some reason my mini nvr stopped to detect i12 protocol (Escam QD900) cameraHello Patmas,
Can you confirm that the i12 protocol was working perfectly with the ESCAM QD900 cameras?
-
Hey Patmas,
You've upgraded the firmware of your MiniNVR from 20150808 to the latest 20160707
What about 20151231_Firmware?
Does 20150808's firmware is OK for motion's detection with ESCAM QD900?
-
Ok
Thanks Patmas
-
hi,i've read that we can install firmware remotely (thru Browser)
does somebody can tell me how to install firmware remotely ?
Thanks a lot
If you haven't found it yet, go to "System Management" > "System Update", there you should get a 'choose file' button that allows you to browse to the firmware file and upload it by clicking the 'update' button.
thanks for your reply but i don't see 'remotely's notion' in your explanations (it is a local update).
-
hi,
i've read that we can install firmware remotely (thru Browser)
does somebody can tell me how to install firmware remotely ?
Thanks a lot
-
You are hard with me.....
Let us reframe the situation.
The DIGOO has an HI3520D and costs $ 25 (produced by China)
The mini NVR has an HI3520 and costs $ 35 (produced also by China?)
Most of these materials are Chinese AND produced in Shenzen.
Much similarity material and yet a lot of ink sank on the mini NVR
You do not want to be more constructive, tom?
-
Hi. 12 Ch nvr for $26. There is not much to expect from it.I expected another answer. An answer like 'you can use an alternative firmware such as this one ...'
Thank you for your participation
-
Nobody to help me?
-
Hello,
I received my NVR DIGOO DG-XME. It seems to have an Hi3520d processor.
I configured my 3 IP cameras ESCAM Brick QD900 WIFI.
But after a few days, I noticed a few dysfunctions:
- motion detection zone settings: 'failed to get the configuration'
- overwrite record history
A desolate silence on the part of the support
Can be an alternative firmware?
Thanks for your help.
-
Try to set a backup's directory with a simple name without space,(,),.......
-
@lesterb: and your motion.does it work fine?
-
Hi,
after checking my NVR's system, i discover that my firmware's date is 20150808 (the last?)
so i just update my system with : 20150808_Firmware_Enable_RTSP
I connect my camera ESCAM brick QD900 WIFI, first setup on ONVIF, on RTSP.
Motion detection has the same problem. i've the error message: ERROR DURING SAVING PARAMETER
Nothing has been changed
on a motion detection system that works, is anyone know what file is stored in this setting?
I might be directly edit the file?
Best regards
-
Hi,
after checking my NVR's system, i discover that my firmware's date is 20150808 (the last?)
so i just update my system with : 20150808_Firmware_Enable_RTSP
I connect my camera ESCAM brick QD900 WIFI, first setup on ONVIF, on RTSP.
Motion detection has the same problem. i've the error message: ERROR DURING SAVING PARAMETER
Nothing has been changed
on a motion detection system that works, is anyone know what file is stored in this setting?
I might be directly edit the file?
Best regards
-
thanks patmas,
some cameras has different command line using RTSP or HTTP like this:
- rtsp://IPADDRESS:554/cam[CHANNEL]/h264
- http://IPADDRESS:554/videostream.cgi?user=[uSERNAME]&pwd=[PASSWORD]&resolution=32&rate=0
What is the difference?
Does the firmware patch enabling RTSP works fine with HTTP:\\ command line?
Br
-
Hello everybody,
i've read all the 70 pages of this post. Interessant!
I’ve just bought my MINI NVR8 (N6200-8E).
I will try to connect all my cameras one after one.
The first I’ve tried to connect is an ESCAM Brick QD 900 WIFI. [ONVIF]. After some fight, it seems to work fine. Cool!
BUT, motion's zone and sensibility's setup are not saved when i leave the setup (reading this post, it seems it is a problem of ONVIF's cameras...)
I’ve tried the 2th: a NEO COOLCAM NIP-26 HD 720p H.264. it seems to be a FOSCAM's clone that can use RTSP protocol.
The NVR don't detect it on my lan.
so, i've.....today....2 questions:
- i've read that we can use RTSP protocol. HOW TO SET RTSP protocol?
- what can i do to retrieve saving of motion's zone (for ALL protocols)?
Thanks for your help
Best regards
Mini nvr questions
in Digital Video Recorders
Posted
Well,
i've discovered an asian web site of a supplier of motherboards for NVR.
they offers to update your material with update:
http://www.xiongmaitech.com/en/index.php/product/product-list/4/0/1
What is the mini nvr (if it is present in the list)?
perhaps, a new update......