AweShucks
-
Content Count
2 -
Joined
-
Last visited
Posts posted by AweShucks
-
-
I have 2 motorized zoom cameras installed and I'm unable to control either zoom and or access the camera OSD menu. Specs are as follows
Both cameras are Dahua HD-CVI connected to Dahua HD-CVI dvr.
Both cable runs are approx 350-400ft on rg59
Both are powered from a power supply within 80ft
My picture is as expected under both day and night conditions.
I've installed many of these cameras before some on runs longer than these and never had this problem before. I've checked baud rate and address. Problem persists regardless of channel.
I at first thought it was a power issue and swapped power supplies. I find it very odd I can't even access the OSD menu.
Any Ideas are appreciated
Motorized Zoom camera unreponsive.
in Video Transmission/Control Devices
Posted
Yes video is fine. The manual states address of 1 and baud rate of 9600. This is the default configuration. I have 5 of these exact same cameras on this system all of those work fine.
I'm thinking wire it is the only thing these 2 cameras have in common yet different from the other 5 cameras.