Trafic
-
Content Count
9 -
Joined
-
Last visited
Posts posted by Trafic
-
-
Hello
It looks like I "killed" for good now...
In the absence of suggestions i tried all commands of u-Boot until to this two..
bubt - Burn an image on the Boot Nand Flash.
file-name
Burn a binary image on the t Nand Flash, default file-name is u-boot.bin .
bubt_vic- Burn an image on the Boot Nand Flash By Vic.
file-name
Burn a binary image on the Boot Flash.
After run the (bubt_vic) I froze and leds which indicating the presence Hdd lights up (Although no hdd connected)...
Tried reset (buttons not working) disconnected from power supply.. nothing... just LEDs are on... no more connection via serial (for PuTTY) or network for Tftpd32.
I believe that the only solution would be a JTAG connection via a cable Jtag to LPT (to flash NAND) ..but I do not know the procedure and what programs to use..
Some help please...
-
Trying to solve the problem, I installed a program named FreeNFS (It seems to work with Windows 8.1 - my laptop OS) and it changed something.....
Looking up port of RPC 100003/2 on 10.4.50.5
egiga0: link up, half duplex, speed 100 Mbps
call_verify: server 10.4.50.5 requires stronger authentication.
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 10.4.50.5
call_verify: server 10.4.50.5 requires stronger authentication.
Root-NFS: Unable to get mountd port number from server, using default
Does anyone know how I can pass the stronger authentication ?
Thanks
-
Then I tried a reprogramming via TFTPD32 and stuck here ...
˙#NAND bootstrap
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER ** ,modify by scott
** MARVELL BOARD: RD-88F5182-NAS-3 LE
U-Boot 1.1.1 (Aug 21 2009 - 17:14:33) C2A9 B version: 1.1.0.8
Vic Size = 0x8000000
DRAM CS[0] base 0x00000000 size 128MB
Vic Size = 0x8000000
DRAM CS[1] base 0x08000000 size 128MB
DRAM Total size 256MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
NAND:devNum=3,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191
scott test NAND ADDRESS = f6000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 894
enter nand_probe cmd_nand.c 1658
NAND mfr id ec at cmd_nand.c 678
NAND id id 75 at cmd_nand.c 679
1 flash chips found. Total nand_chip size: 32 MB
0xf6000000: 32 MB
devNum=1,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191
scott test NAND ADDRESS = f8000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 900
enter nand_probe cmd_nand.c 1658
NAND mfr id ec at cmd_nand.c 678
NAND id id 75 at cmd_nand.c 679
1 flash chips found. Total nand_chip size: 32 MB
0xf8000000: 32 MB
Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 166Mhz , TClock = 166Mhz
USB 0: host mode
USB 1: host mode
pciIfNum:2,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_pci.c 628
PCI 0: PCI Express Root Complex Interface
vendor id:0x11ab header_type:0x0, pci.c 471
PCI Scan: Found Bus 0, Device 0, Function 0
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x0, pci.c 471
PCI Scan: Found Bus 0, Device 1, Function 0
device id:0x6121, pci.c 479
CONFIG_PCI_PNP
end at 502 in pci_hose_scan_bus
PCI 1: Conventional PCI, speed = 33000000
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 0
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 1
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 2
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 3
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 4
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 5
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 6
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 7
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x9413 header_type:0x0, pci.c 471
PCI Scan: Found Bus 1, Device 9, Function 0
device id:0x6010, pci.c 479
=pci.c 492
end at 502 in pci_hose_scan_bus
i = 0
@@value = 243
i = 1
@@value = 243
i = 2
@@value = 243
i = 3
@@value = 243
i = 4
@@value = 243
i = 5
@@value = 243
i = 6
@@value = 243
i = 7
@@value = 243
i = 8
@@value = 255
i = 9
@@value = 255
i = 10
@@value = 255
i = 11
@@value = 255
i = 12
@@value = 255
i = 13
@@value = 255
i = 14
@@value = 255
i = 15
@@value = 255
video type = 1
Net: eth.c 133
egiga0 [PRIME]
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... i=0
usb_get_dev_index i=0
usb_get_dev_index dev!=NULL
iVendor 0 iProduct 0
devClass=9 IFClass=9 IFSubClass=0
i=1
usb_get_dev_index i=1
0 Storage Device(s) found
Erasing Nand...Writing to Nand... done
Hit any key to stop autoboot: 0
Using egiga0 device
TFTP from server 10.4.50.5; our IP address is 10.4.50.165
Filename 'uImage'.
Load address: 0x400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########################################################
done
Bytes transferred = 2288400 (22eb10 hex)
## Booting image at 00400000 ...
Image Name: Linux-2.6.22.7
Created: 2011-01-19 4:23:53 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2288336 Bytes = 2.2 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux................................................................................................................................................. done, booting the kernel.
Linux version 2.6.22.7 (vicye@localhost.localdomain) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #58 Wed Jan 19 12:23:41 CST 2011
CPU: ARM926EJ-S [41069260] revision 0 (ARMv5TEJ), cr=a0053177
Machine: Feroceon
Using UBoot passing parameters structure
scott trace mac-> mvUbootVer:0x10c010f
scott trace mac-> tag->u.mv_uboot.EthAddr:0xff:df:f7:ff:ff:ff
scott trace mac->mvMacAddr:0xff:df:f7:ff:ff:ff
scott clear mac->mvMacAddr:0x0:0:0:0:0:0
Memory policy: ECC disabled, Data cache writeback
BUG: not creating mapping for 0x98000000 at 0x98000000 in user region
BUG: not creating mapping for 0x40000000 at 0x40000000 in user region
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Built 1 zonelists. Total pages: 65024
Kernel command line: console=ttyS0,115200 root=/dev/nfs rw nfsroot=10.4.50.5:/mnt/ARM_FS/ ip=10.4.50.165:10.4.50.5:::DB88FXX81:egiga0:none
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB 128MB = 256MB total
Memory: 255104KB available (4264K code, 275K data, 112K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
-------------------mvDevNandSet-----------------
Sys Clk = 166666667, Tclk = 166666667
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 128MB
SDRAM_CS1 ....base 08000000, size 128MB
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base 98000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
PCI0_MEM ....base 40000000, size 1GB
PCI0_IO ....base f2100000, size 1MB
INTER_REGS ....base f1000000, size 1MB
DEVICE_CS0 ....no such
DEVICE_CS1 ....base f8000000, size 32MB
DEVICE_CS2 ....no such
DEV_BOOCS ....base f6000000, size 32MB
CRYPT_ENG ....base f0000000, size 64KB
Marvell Development Board (LSP Version 3.0.5_NAS_GDP_p8)-- RD-88F5182-NAS-3 Soc: 88F5182 A2
Detected Tclk 166666667 and SysClk 166666667
Marvell USB EHCI Host controller #0: c06ec600
Marvell USB EHCI Host controller #1: c06ec400
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: orion_clocksource clocksource has been installed.
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
RTC registered
cesadev_init(c000c61c)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
NTFS driver 2.1.28 [Flags: R/W].
JFFS2 version 2.2. (NAND) ĂŠ 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
Intel® PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright © 1999-2006 Intel Corporation.
Marvell Ethernet Driver 'mv_ethernet':
o Uncached descriptors in DRAM
o DRAM SW cache-coherency
o TCP segmentation offload enabled
o Checksum offload enabled
o Rx desc: 128
o Tx desc: 256
o Loading network interface 'egiga0'
e100: Intel® PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright© 1999-2006 Intel Corporation
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
nand_dev_num=3
---------NANDFLASH--------
baseLow=0xf6000000
baseHigh=0x0
size=0x2000000
enable=0x1
winNum=0x4
--------------------------
nand physaddr=0xf6000000
mv_mtd=0xcff21400
NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)
Scanning device for bad blocks
Using static partition definition
Creating 3 MTD partitions on "nand_mtd":
0x00000000-0x00100000 : "u-boot"
0x00100000-0x00400000 : "uImage"
0x00400000-0x02000000 : "file-system"
nand_dev_num=3
---------NANDFLASH--------
baseLow=0xf8000000
baseHigh=0x0
size=0x2000000
enable=0x1
winNum=0x6
--------------------------
nand physaddr=0xf8000000
mv_mtd=0xcff21000
NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit)
Scanning device for bad blocks
Using static1 partition definition
Creating 1 MTD partitions on "nand_mtd1":
0x00000000-0x02000000 : "nandflash2"
ehci_marvell ehci_marvell.4523: Marvell Orion EHCI
ehci_marvell ehci_marvell.4523: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.4523: irq 17, io base 0xf1050100
ehci_marvell ehci_marvell.4523: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_marvell ehci_marvell.167817: Marvell Orion EHCI
ehci_marvell ehci_marvell.167817: new USB bus registered, assigned bus number 2
ehci_marvell ehci_marvell.167817: irq 12, io base 0xf10a0100
ehci_marvell ehci_marvell.167817: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1 20 MB/s
raid6: int32x2 32 MB/s
raid6: int32x4 37 MB/s
raid6: int32x8 37 MB/s
raid6: using algorithm int32x4 (37 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
arm4regs : 386.000 MB/sec
8regs : 272.000 MB/sec
32regs : 315.600 MB/sec
raid5: using function: arm4regs (386.000 MB/sec)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver snd-usb-caiaq
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
N Im = 0x1, P Im= 0x1, value = 0x8240
current phy impedance value = 0x4c0a
egiga0: link down
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
device=egiga0, addr=10.4.50.165, mask=255.0.0.0, gw=255.255.255.255,
host=DB88FXX81, domain=, nis-domain=(none),
bootserver=10.4.50.5, rootserver=10.4.50.5, rootpath=
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Looking up port of RPC 100003/2 on 10.4.50.5
egiga0: link up, half duplex, speed 100 Mbps
rpcbind: server 10.4.50.5 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 10.4.50.5
rpcbind: server 10.4.50.5 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 10.4.50.5 not responding, timed out
Root-NFS: Server returned error -5 while mounting /mnt/ARM_FS/
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 1024 mtdblock0 (driver?)
1f01 3072 mtdblock1 (driver?)
1f02 28672 mtdblock2 (driver?)
1f03 32768 mtdblock3 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
....here it stuck
Any ideas?
it is possible that the boot file is not 100% compatible (not found exactly for SEB5108Lite .. just found for SEB 5108/5116 and SEB 5108H/5116H -- )
-
Hello.
After a lot of work I was able to connect the DVR to a laptop via RS232 and PuTty = > log file
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER ** ,modify by scott
** MARVELL BOARD: RD-88F5182-NAS-3 LE
U-Boot 1.1.1 (Aug 21 2009 - 17:14:33) C2A9 B version: 1.1.0.8
Vic Size = 0x8000000
DRAM CS[0] base 0x00000000 size 128MB
Vic Size = 0x8000000
DRAM CS[1] base 0x08000000 size 128MB
DRAM Total size 256MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
NAND:devNum=3,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191
scott test NAND ADDRESS = f6000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 894
enter nand_probe cmd_nand.c 1658
NAND mfr id ec at cmd_nand.c 678
NAND id id 75 at cmd_nand.c 679
1 flash chips found. Total nand_chip size: 32 MB
0xf6000000: 32 MB
devNum=1,mvBoardGetDeviceBaseAddr /home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/Board/boardEnv/mvBoardEnvLib.c 1191
scott test NAND ADDRESS = f8000000,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_main.c 900
enter nand_probe cmd_nand.c 1658
NAND mfr id ec at cmd_nand.c 678
NAND id id 75 at cmd_nand.c 679
1 flash chips found. Total nand_chip size: 32 MB
0xf8000000: 32 MB
Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 166Mhz , TClock = 166Mhz
USB 0: host mode
USB 1: host mode
pciIfNum:2,/home/users/vicye/C2A9/uboot_c2a9/board/mv88fxx81/USP/mv_pci.c 628
PCI 0: PCI Express Root Complex Interface
vendor id:0x11ab header_type:0x0, pci.c 471
PCI Scan: Found Bus 0, Device 0, Function 0
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x0, pci.c 471
PCI Scan: Found Bus 0, Device 1, Function 0
device id:0x6121, pci.c 479
CONFIG_PCI_PNP
end at 502 in pci_hose_scan_bus
PCI 1: Conventional PCI, speed = 33000000
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 0
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 1
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 2
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 3
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 4
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 5
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 6
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x11ab header_type:0x80, pci.c 471
PCI Scan: Found Bus 1, Device 0, Function 7
device id:0x5182, pci.c 479
CONFIG_PCI_PNP
vendor id:0x9413 header_type:0x0, pci.c 471
PCI Scan: Found Bus 1, Device 9, Function 0
device id:0x6010, pci.c 479
=pci.c 492
end at 502 in pci_hose_scan_bus
i = 0
@@value = 243
i = 1
@@value = 243
i = 2
@@value = 243
i = 3
@@value = 243
i = 4
@@value = 243
i = 5
@@value = 243
i = 6
@@value = 243
i = 7
@@value = 243
i = 8
@@value = 255
i = 9
@@value = 255
i = 10
@@value = 255
i = 11
@@value = 255
i = 12
@@value = 255
i = 13
@@value = 255
i = 14
@@value = 255
i = 15
@@value = 255
video type = 1
Net: eth.c 133
egiga0 [PRIME]
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... i=0
usb_get_dev_index i=0
usb_get_dev_index dev!=NULL
iVendor 0 iProduct 0
devClass=9 IFClass=9 IFSubClass=0
i=1
usb_get_dev_index i=1
0 Storage Device(s) found
Erasing Nand...Writing to Nand... done
Hit any key to stop autoboot: 0
usb_read: dev 0
** Can't read from device 0 **
** Unable to use usb 0:1 for fatload **
usb_read: dev 0
** Can't read from device 0 **
** Unable to use usb 0:1 for fatload **
## Booting image at 00400000 ...
Bad Magic Number
.... and here RESTART
-
Hello.
Can someone help me with an EEPROM (Boot) program(Dump) for AverMedia SEB 5116Lite or 5108Lite ?
Thanks
-
I'm the unluckiest man right now...
I contacted Aver support and were kind enough to send me a password reset.
But I did not get to use it because before to begin the password reset process, I installed a new HDD to prepare everything. (stupid mistake)
After I installed HDD the DVR entered in a RESTART LOOP every 10s color bars appear(normal) but then when it should appear "loading ...%" screen it just restart , again color bars again restart..and so on)... No boot.
I tried everything (another HDD, without HDD,some Recover firmware and firmware found on the Internet, but does not read USB Stick).
Some ideas?
PS: Sorry for my english
Thanks
-
Yes.. and 12346, admin admin, 000000... unsuccessfully.
-
Hello.
I own a dvr AverMedia Seb5108 Lite that I have not used one year and forgot the password.
I know there are a masterpassord or hardreset but i did not find any documentation .
On the pcb are two buttons and a few jumpers but I do not know for what.
If someone can help me with some advice I would be grateful .
Thanks in advance.
Reseting password DVR AverMedia Seb5108 Lite
in Digital Video Recorders
Posted
Hi..I'm from Romania..
I'm sure that can be reset via Jtag, but it is complicate and not have the necessary files and Jtag interface..I know..