I have been running Hikvision iVMS-4200 for a few months. It was so non-intuitive, that I decided to type up everything I knew so I wouldn't forget. I hope everyone appreciates this: it took a while!
-Tony17112acst
Hikvision and LTS Camera Software - How to Setup Motion Recording
Hikvision's VMS is iVMS-4200, LTS's is NVMS7000. Cameras & software are the same; Hikvision software has more options.
CAMERA SETUP
1. First use the SADP.exe program to detect your cameras and change the IP addresses to your desired network settings.
- Use 12345 as admin password. You will want to change the password (in step 5) to combat internet intruders.
- Set a different Server Port for each camera to allow easy access via smart phone.
2. Start the iVMS-4200 install & select "Client" and "Storage Server" checkboxes; Storage Server is needed to record to your HD.
3. Start VMS client and select a Super User name and password.
4. In Control Panel, select Device Management. All cameras should appear in bottom section of the "Server" tab.
5. In the "Server" tab, click/select a camera (in the bottom section) and click "Add to Client" for each camera.
- Name your camera as desired. Be sure the IP address, port number, and Username/Password match camera settings.
- Uncheck box "Export to Group." We will create a group (required) after adding all cameras to the Server tab.
- The default username and password is admin and 12345. You'll want to change the password to combat internet intruders.
- Change camera password: Select camera (top section), click "Remote Configuration," select "User" in "System" section.
- Change saved password to match new password: Select camera in top section and click "Modify." Enter new password.
- Each camera should have a green round icon for "Resource Usage Status," "Signal Status," and "Hardware Status."
- The "HDD Status" and "Recording Status" may have red icons if there is no internal SD card in the camera (which is OK).
6. Click on the "Group" tab in Device Management and click the "Add Group" icon (a folder with a plus sign); name your group.
- Select the Group you just created on the left panel and click on "Import" in the right panel. Click the "Import All" button.
- Double-click on each camera to change its name to simplify, if desired.
7. In Control Panel, click on Main View. Drag each camera from the lower left panel into the right viewing area to view cameras.
STORAGE SERVER SETUP
8. Start iVMS-4200 Storage Server (NvrStorageServer.exe, or start from icon created on desktop during installation).
- Two new small icons will appear in the systray (or notification area): Storage Server and Watchdog.
9. In Device Management, Server tab, click "Add New Device Type" in the left Organization panel. Select "Storage Server."
- Select "Storage Server" in the left panel to show the storage server device. Your PC should have a static IP address.
- The IP address of the Storage Server will be the IP address of the PC since it's just a program running in memory of the PC.
- Video on a hard drive must be located on a different hard drive than the operating system. Typically C: drive cannot be used.
- Add a separate Hard Drive (best option) or partition your current HD to avoid operating system failure due to no HD space.
10. Select Storage Server in the bottom section & click "Add to Client." Name it and use admin/12345 to access the Storage Server.
- Change admin password: From Server tab, Storage Server, select Server in top section and "Remote Configuration."
- Change saved password to match new password: Select server in top section and click "Modify." Enter new password.
11. Select storage server in top section and click on Remote Configuration. Select "General" in the "Storage" section.
- Select checkbox of hard drive that will host video files (not the operating system HD) and format by clicking "Format."
EVENT SETUP (Motion Recording)
12. Select Event Management from Control Panel. For each camera in the left panel, select "Motion detection" from the Event Type.
- Check the "Enable" box, "All-day Template" from Arming Schedule drop-down, and fill in Arming Region to be monitored.
Has anyone got Hikvision iVMS 4200 v2 working as a PCNVR?
in IP/Megapixel Cameras and Software Solutions
Posted
Holy **** thank you for this, I just got a new DS-2DE3304W-DE and I was having so much trouble setting it up