LucyB
-
Content Count
5 -
Joined
-
Last visited
Posts posted by LucyB
-
-
How does that work with POE camera ?
-
The camera needs to be installed in the cab , there is a traveling cable that links the cab to the elevator penthouse on the roof. There is no EMT running to the cab as it moves up and down .
-
In the elevator penthouse we have a cat6 cable that runs back to a switch on the 7th floor. Camera and recorder are all up based .
-
I doing an install on a 7 floor building and was expecting coax in the traveling cable for the elevator for a camera install but the elevator company said that they don't install coax or cat5 cables as they have seen them break after a few years. (even the ones with steel in them)
They have handed me 5 X 20/2 AWG shielded wire
I had hoped to do a IP camera and then a coax /POE injector for the camera
http://www.veracityglobal.com/products/ethernet-over-coax-devices/highwire-powerstar.aspx
but that looks like that might not be possible any ideas ? would a male BNC break out connector work ?
Traveling cable and Camera install for elevator
in Installation Help and Accessories
Posted
Tried to have a 110 socket installed on top of cart but was not allowed by elevator company