Allen2015
-
Content Count
6 -
Joined
-
Last visited
Posts posted by Allen2015
-
-
hello! I set up my first cctv.cameras work, but when i click on playback, there is no video.
i am new to this, and cannot find out what is wrong.
thank you
Maybe you need to carefully read the instruction.Usually camera automatically recorded by default, but there are exceptions.Then choose the record button,if it work,it will have the video.Hope it is useful to you!
-
I am a loss prevention agent. I have an intellex CCTV system. I have previously been able to add new cameras using RG59 cable and BNC connectors.However, one of my cameras started showing only a black screen. I adjusted the connector, at which point it started giving no video at all. I have replaced every component, but it still does not show video (I literally ran a new cable and camera to the same spot.) The closest I get is a very blurry picture for a few seconds, and then video loss. The camera has power and the wire has tested good, which makes me think om screwing up the BNCs somehow.
Any help would be greatly appreciated.
Do you try a new camera, or check the BNC?Maybe there is something wrong with the camera.If new camera could work ,all will be OK.If not,just ask for maintenance staff.
-
Hi allI am looking into a project where I have a Uniview camera set at a construction site and only use a 128GB SD micro card for storage.
Tools and materials are coming up missing.
It will not be connected to any network or NVR. Would anyone know if this should work and if so what would it take to get it to work.
I have been playing around with one in my office and am not having any luck getting the camera to record to the SD micro card.
I am asking about the Uniview cameras because it is what I am most familiar with.
If this will not work does anyone know of a camera that would work will for this application? The camera will be outside.
Specific camera has its own dedicated NVR and program, you should know when buying, in order to ensure the normal use of the latter.
-
HiI got some new cameras from Amazon.
ANNKE 4 Channel HD 1080P SPOE Security Camera
One of the cameras won't work once it's on the wall. I've took it down a few times now to check it. Once it's down it works fine. I've checked the cat5 cable with a line checker and that's fine. I've just put it back up and once again it's stop working. Just get a blank pitcure? Can anyone help
First ,other cameras could work once they are on the wall?
Second, how you check it, if make a video?
These are important for the others to help you.Or it is difficult to say what's wrong with the camera.
-
I have 2 imporx cameras that I was able to successfully set up, but now one of the cameras isn't displaying an image and isn't showing up as an online device in the SADP software. Any trouble shooting suggestions would be greatly appreciated.Please check all interfaces are connected correctly.If all is right,maybe you could ask for the customer service.
Monitoring Software for CCTV
in Installation Help and Accessories
Posted
Maybe you could ask the customer service for the app for it, it is easy and quick.