Jump to content

Stobby123

Members
 View Profile  See their activity

  • Content Count

    3

  • Joined

  • Last visited

Posts posted by Stobby123

  2. Posted

    i have a KKMOON system it has 4 wireless cameras and was working fine i changed the resolution now i can't get it to turn on, in side there is a small battery which ive taken out to see if it would re set there is 4 standalone pins which i think could be jumper pins is this right as i don't really know what i'm doing,

     

    thanks Pete

  3. Posted

    I have purchased on Ebay a No Name H.264 DVR (circuit board #GM8182T)with v01.00.00.32(4CIF 128M) as firmware, I installed all the cameras and set it up and as it got dark outside I noticed the video (nite vision) wasn't all that so I decided to go into the main menu and check the settings to see if there was anything there that I might be able to improve the quality with, in Display I checked the resolution, there were two options and thought I would try the second option and change it back if nothing altered.

    I hit save the box beeped the screen flashed off and on, nothing had changed the quality hadn't changed however the curser had gone, without a curser I cant get into the menu to change it back or for that matter check recordings or anything else, I powered off and back on, still the same, opened the box removed the battery to reset the CMOS, still the same.

    I have tried the remote which will change the view to each camera or 4 cameras on screen but when I hit the Menu button it stops all other functions until I hit esc then I can change views but still no menu I even plugged in a keyboard which will reboot the unit when I hit CTRL/ALT/DEL so there is functionality with remote mouse and keyboard but no curser and no menu.

    Does anyone have a clue how to reset these things to factory default or re install the firmware without going through the menu

     

    did you get this sorted as mine has done the same, thanks,

×