DanGe91
-
Content Count
2 -
Joined
-
Last visited
Posts posted by DanGe91
-
-
Sorry in advance, I have done a search but unable to find anything relevant.
I have 4 cameras on my system. Two dome cameras and two hikvision darkfighter. The two dome ones work fine but I am having issues with the darkfighter cameras.
The cameras work fine during the day but once the IR kicks in, the camera starts to flicker on the screen and then shows no signal. I have tried different power supplies but still have the same issue. The camera is using a standard cable (25m).
Can anyone offer an advice?
I have thought about buying the the bnc to Ethernet adapters and trying that but not sure whether it will work.
Thanks.
Camera shows no signal when IR kicks in at night
in Security Cameras
Posted
I have actually just found another post similar and one someone commented the following:
Would the following work based on the above:
https://www.amazon.co.uk/VIMVIP-HD-CVI-Passive-Connector-Transmitter/dp/B06Y4KQYV9/ref=pd_lpo_vtph_107_bs_tr_t_1?_encoding=UTF8&&psc=1&&refRID=S4F63VW97JSC5C4CZQVH
Something else to add is that if you look at the camera after it shows no signal, the LEDS are still red so the camera is receiving power.